AXIS207 Datasheet | Advanced XTAL Products

.. Specification AXIS207 Oscillator type : VCXO in DIL14 package Parameter Frequency range Frequency stability vs. temperature vs. supply voltage variation vs. load change long term (aging) per year Frequency adjustment range Electronic Frequency Control (EFC) Issue: 01 Date:2008-05-07 min. 6 1 typ. max. 190 800 Unit MHz MHz ppm ppm ppm ppm ppm ppm ppm ppm V V kΩ Condition Sinewave HCMOS, PECL, LVDS See tables 1 & 2 ± 10 % @+40°C Option 5 = “5” Option 5 = “10” Option 5 = “15” Option 1 = “3” Option 1 = “5” Option 6 = blank Option 6 = “N” (Note 4) ± 10 ppm to ± 100 ppm ±3 ± 50 ± 100 ± 150 0.15 0 EFC voltage VC EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform 1.65 2.5 Positive negative 3.15 5 100 Load Amplitude Supply voltage VS Current consumption (Note 3) Storage temperature range Enclosure (see drawing) L x W x H Marking Packing Construction Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated 2. All binations of options might not be available. Please consult factory 3. Depending on frequency and supply voltage 4. Negative slope only available for HCMOS Output version (Option 2 = “H”) Sine wave HCMOS PECL LVDS 50 Ω 15 pF 50 Ω + bias 0 dBm +10 dBm According to relevant Logic Standard 3.15 3.3 3.45 V 4.75 5.0 5.25 V 15 ~ 70 mA 15 ~ 100 mA 25 ~ 100 mA -45 +90 °C 20.7 x 13,1 x 5.1 max. mm or 20.7 x 13,1 x 7.5 max. AXIS207 Freq wwAXPyy Tape & reel Lead(Pb) -free Option 2 = “S” Option 2 = “H” Option 2 = “P” Option 2 = “L” Option 2 = “S” Option 2 = “H” Option 2 = “P” or “L” Option 2 = “S” / 3.3 V Option 2 = “S” / 5.0 V Option 2 = “H”, “P”,“L” Option 1 = “3” Option 1 = “5” Option 2 = “S” Option 2 = “H” Option 2 = “P” or “L” IEC60679-3 CO 02 Specification...