A3232 Datasheet | AiT Semiconductor

DESCRIPTION FEATURES The A3232 consists of two drivers, two receivers, - RS-232 Bus-terminal ESD protection Exceeds and a dual charge-pump circuit with ±12k V IEC - ±12k V (IEC61000-4-2, Contact Discharge) 61000-4-2 Contact Discharge ESD protection. - ±15k V (IEC61000-4-2, Air-Gap Discharge) - Meets the Requirements of TIA/EIA-232-F The A3232 meets the requirements of TIA/EIA-232- standard F and provides the electrical interface between an - Operates with 3V to 5.5V VCC Supply asynchronous munication controller and the - Operates up to 250kbps serial-port connector. - Two Drivers and Two Receivers - External Capacitors: 4 × 0.1 u F The charge pump and four small external capacitors - Accepts 5V Logic Input With 3.3V Supply allow operation from a single 3V to 5.5V supply. The - Operation Temperature: -40℃ ~ +125 ℃ A3232 operates at data signaling rates up to 250 kbps. APPLICATION The A3232 is available in SOP16 and TSSOP16 - package. - - - ORDERING INFORMATION - - Package Type Part Number - Industrial PCs Wired Networking Data Center and Enterprise Networking Battery-Powered Systems PDAs, Hand-held Equipment Notebooks, Laptops, Palmtop PCs Printers SOP16 SPQ: 2,500pcs/Reel A3232M16R M16 A3232M16VR BLOCK DIAGRAM TSSOP16 SPQ: 2,500pcs/Reel A3232TMX16R TMX16 A3232TMX16VR Note V: Halogen free Package R: Tape & Reel Ai T provides all Ro HS products REV1.0...