FD20-18S3V3B2C5 - DC/DC Converter

Key Features

Wide Input Voltage Range( 4:1)，Output power 12W.
Transfer Efficiency up to 90%.
Stand-by Power Consumption as low as 0.2W.
Output super-fast start up.
Continuous Short Circuit protection, Self-recovery.
Input under voltage, output over voltage, short circuit, over current protection.
Switching Frequency 300KHz.
Isolation Voltage: 5000VDC.
Operating temperature：-40°C~+85°C.
Good EMI performance.
International standard pin-out Testing Conditi.

FD20-18S3V3B2C5 dc/dc converter by Aipu Electron - Datasheet Preview

Datasheet Details

Part number	FD20-18S3V3B2C5
Manufacturer	Aipu Electron
File Size	1.13 MB
Description	DC/DC Converter
Datasheet	FD20-18S3V3B2C5 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
FD2000	LCD Display Driver	Finechips
FD2000DU-120	HIGH POWER/ HIGH FREQUENCY/ PRESS PACK TYPE	Mitsubishi Electric Semiconductor
FD2000DU-120	HIGH POWER/ HIGH FREQUENCY/ PRESS PACK TYPE	Powerex Power Semiconductors
FD200R12KE3	IGBT	Infineon
FD200R12KE3P	IGBT	Infineon

Other Datasheets by Aipu Electron

Part Number	Description
FD20-18S05B2C5	DC/DC Converter
FD20-18S09B2C5	DC/DC Converter
FD20-18S12B2C5	DC/DC Converter
FD20-18S15B2C5	DC/DC Converter
FD20-18S24B2C5	DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DC/DC Converter FD20-XXSXXB2C5 Series Product Typical Features ◆ Wide Input Voltage Range( 4:1)，Output power 12W ◆ Transfer Efficiency up to 90% ◆ Stand-by Power Consumption as low as 0.2W ◆ Output super-fast start up ◆ Continuous Short Circuit protection, Self-recovery ◆ Input under voltage, output over voltage, short circuit, over current protection ◆ Switching Frequency 300KHz ◆ Isolation Voltage: 5000VDC ◆ Operating temperature：-40°C~+85°C ◆ Good EMI performance ◆ International standard pin-out Testing Condition: Unless otherwise specified, data in the datasheet should be tested under the conditions of inputting nominal voltage, pure resistance rated load and Ta=25℃.