APS11200
2
-
High-Temperature Precision Hall-Effect Switch
FEATURES AND BENEFITS
• Unipolar switchpoints
• ASIL A functional safety compliance
• Automotive-grade ruggedness and fault tolerance
□□Extended AEC-Q100 qualification
□□Reverse-battery and 40 V load dump protection
□□Operation from –40°C to 175°C junction temperature
□□High EMC immunity, ±12 kV HBM ESD
□□Output short-circuit and overvoltage protection
□□Superior temperature stability
□□Resistant to physical stress
• Operation from unregulated supplies, 2.8 to 24 V
• Chopper stabilization
• Solid-state reliability
• Industry-standard packages and pinouts
PACKAGES:
Not to scale
3-pin SIP
(suffix UA)
3-pin SOT23W
(suffix LH)
DESCRIPTION
The APS11200 is a three-wire, planar Hall-effect sensor
integrated circuit (IC).This device was developed in accordance
with ISO 26262 and supports a functional safety level ofASILA.
This Hall-effect switch IC features extended AEC-Q100
qualification and is ideal for high-temperature operation up
to 175°C junction temperatures. In addition, the APS11200
includes a number of features designed specifically to maximize
system robustness such as reverse-battery protection, output
current limiter, overvoltage, and EMC protection.
The single silicon chip includes: a voltage regulator, a Hall
plate, small signal amplifier, chopper stabilization, Schmitt
trigger, and a short-circuit-protected open-drain output. A
south pole of sufficient strength turns the output on. Removal
of the magnetic field—or a north pole—turns the output off.
The devices include on-board transient protection for all pins,
permitting operation directly from a vehicle battery or regulator
with supply voltages from 2.8 to 24 V.
Two package styles provide a choice of through-hole or surface
mounting. Package type LH is a modified SOT23W, surface-
mount package, while UA is a three-lead ultra-mini SIP for
through-hole mounting. Both packages are lead (Pb) free and
RoHs compliant with 100% matte-tin leadframe plating.
VCC
Hall
Element
Functional Block Diagram
HALL
AMP.
REGULATOR
SAMPLE, HOLD &
AVERAGING
TO ALL SUBCIRCUITS
LOW-PASS
FILTER
SCHMITT
TRIGGER
CONTROL
CURRENT
LIMIT
VOUT
APS11200-DS, Rev. 2
MCO-0000381
GND
January 22, 2020