Datasheet Details
| Part number | APS11202 |
|---|---|
| Manufacturer | Allegro MicroSystems |
| File Size | 1.73 MB |
| Description | Precision Hall-Effect Switch |
| Datasheet | APS11202-Allegro.pdf |
|
|
Overview: APS11202 Chopper-Stabilized, Precision Hall-Effect Switch for Automotive, Consumer, and Industrial.
| Part number | APS11202 |
|---|---|
| Manufacturer | Allegro MicroSystems |
| File Size | 1.73 MB |
| Description | Precision Hall-Effect Switch |
| Datasheet | APS11202-Allegro.pdf |
|
|
|
The APS11202 Hall-effect switch is an extremely temperaturestable and stress-resistant sensor IC, especially suited for operation over extended temperature ranges (up to 150°C).
Superior hightemperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device package overmolding, temperature dependencies, and thermal stress.
The device includes, on a single silicon chip, a voltage regulator, a Hall voltage generator, a small-signal amplifier, chopper stabilization, a Schmitt trigger, and a short-circuit protected open-drain output to sink up to 25 mA.
| Part Number | Description |
|---|---|
| APS11200 | High-Temperature Precision Hall-Effect Switch |
| APS11205 | High-Temperature Hall-Effect Switch |
| APS11450 | Three-Wire Hall-Effect Switch |
| APS11500 | Two-Wire Hall-Effect Switch |
| APS11700 | Micropower Vertical and Planar Hall-Effect Switches |
| APS11753 | Low-Voltage Micropower Switch |
| APS11760 | Micropower Vertical and Planar Hall-Effect Switches |
| APS12000 | Vertical and Planar Hall-Effect Latches |
| APS12060 | Vertical and Planar Hall-Effect Latches |
| APS12170 | Two-Wire Continuous Time Hall-Effect Latch |