* nine open-collector Darlington drivers, each rated at 50 V and 1.6 A. Current-control for each output is provided by an internal current-sensing resistor and a constant-frequency chopper circuit. An external high-side driver can be used to optimize print head performance. It is enabled by an on-chip
UCN5829
Allegro
134.41 KB
9-bit serial-input / latched sink driver.
5829 SERIAL DATA OUT SERIAL DATA IN HIGH-SIDE DRIVER REFERENCE 9-BIT SERIAL-INPUT, LATCHED SINK DRIVER Intended primarily to drive high-current, dot .
📁 Related Datasheet
UCN5821 BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5821A BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5822 BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5822A BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5823 BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5823A BiMOS II 8-BIT SERIAL-INPUT / LATCHED DRIVERS (Allegro)
UCN5800 (UCN5801) BiMOS II LATCHED DRIVERS (Allegro)
UCN5801 BiMOS II LATCHED DRIVERS (Allegro)
UCN5804 BiMOS II UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVER (Allegro)
UCN5804B BiMOS II Translator / Driver (Sprague Electric)
