3361 - HALL-EFFECT SWITCHES

Allegro MicroSystems

General Description

Chopper-Stabilized Technique.

The Hall element can be considered as a resistor array similar to a Wheatstone bridge.

A large portion of the offset is a result of the mismatching of these resistors.

📥 Download Datasheet

3361 hall-effect switches by Allegro MicroSystems - Datasheet Preview

Datasheet Details

Part number	3361
Manufacturer	Allegro MicroSystems
File Size	193.42 KB
Description	HALL-EFFECT SWITCHES
Datasheet	3361 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
336-703	Alpha-numeric keyboard	RS Components
3362	HALL-EFFECT SWITCHES	Allegro
3362	Trimming Potentiometers	Bourns
3362F	Trimming Potentiometers	Bourns
3362M	Trimming Potentiometers	Bourns

Other Datasheets by Allegro MicroSystems

Part Number	Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

3361 AND 3362 Suffix Code 'LH' Pinning 2-WIRE, CHOPPER-STABILIZED, HALL-EFFECT SWITCHES The A3361x and A3362x Hall-effect switches are extremely temperature-stable and stress-resistant sensors. Superior performance over temperature is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress. The two devices differ only in output polarity; the A3361x output current goes low in the presence of a south pole of sufficient strength; the A3362x output current goes high. Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a constant-current open-collector output.