Datasheet4U Logo Datasheet4U.com

A8293 - Single LNB Supply and Control Voltage Regulator

General Description

Intended for analog and digital satellite receivers, this single low noise block converter regulator (LNBR) is a monolithic linear and switching voltage regulator, specifically designed to provide the power and the interface signals to an LNB down converter via coaxial cable.

Key Features

  • 2-wire serial I2C™ -compatible interface: control (write) and status (read).
  • LNB voltages (8 programmable levels) compatible with all common standards including domestic Japan models.
  • Tracking switch-mode power converter for lowest dissipation.
  • Integrated converter switches and current sensing.
  • Provides up to 700 mA load current.
  • Static current limit circuit allows full current at startup and 13→18 V output transition; reliably starts wide load range.
  • P.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A8290 LED DRIVER AiT Semiconductor
A8296 Single LNB Supply and Control Voltage Regulator Allegro
A8297 Dual LNB Supply and Control Voltage Regulator Allegro
A8299 Dual LNB Supply and Control Voltage Regulator Allegro
A82 20 TO 250 MHz CASCADABLE AMPLIFIER Tyco Electronics

Other Datasheets by Allegro MicroSystems

Part Number Description
A8290 Single LNB Supply and Control Voltage Regulator
A8291 Single LNB Supply and Control Voltage Regulator
A8292 Dual LNB Supply and Control Voltage Regulator
A8205SLH LOW-DROPOUT REGULATORS . HIGH EFFICIENCY
A8220SLH LOW-DROPOUT REGULATORS . HIGH EFFICIENCY

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A8293 Single LNB Supply and Control Voltage Regulator FEATURES AND BENEFITS ▪ 2-wire serial I2C™ -compatible interface: control (write) and status (read) ▪ LNB voltages (8 programmable levels) compatible with all common standards including domestic Japan models ▪ Tracking switch-mode power converter for lowest dissipation ▪ Integrated converter switches and current sensing ▪ Provides up to 700 mA load current ▪ Static current limit circuit allows full current at startup and 13→18 V output transition; reliably starts wide load range ▪ Push-pull output stage minimizes 13→18 V and 18→13 V output transition times for highly capacitive loads ▪ Adjustable rise/fall time via external timing capacitor ▪ Built-in tone oscillator, factory-trimmed to 22 kHz facilitates DiSEqC™ tone encodin