Datasheet4U Logo Datasheet4U.com

AS91L1006BU - 6-Port JTAG Gateway

Description

The AS91L1006BU is a one to 6-port JTAG gateway.

It partitions a single JTAG chain into six separate chains.

These separate chains can be optionally configured to operate as a single chain.

Features

  • DataSheet4U. com Device Multi-Drop addressable via the IEEE Provides the ability to initiate Self-Test on a 1149.1 protocol remote PCB via a standard IEEE 1149.1 command Support for 6 local scan chains addressable via the IEEE 1149.1 interface Support for JTAG Technologies AutoWR™ feature Support for Pass-Through™ Pinout and feature set compatible (complete Support for the IEEE 1149.1.

📥 Download Datasheet

Datasheet Details

Part number AS91L1006BU
Manufacturer Alliance Semiconductor
File Size 581.99 KB
Description 6-Port JTAG Gateway
Datasheet download datasheet AS91L1006BU Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS9006-A Ultra-Small CO Driver Transformers Coilcraft
AS9015-A Ultra-Small CO Driver Transformers Coilcraft
AS9632 2-Vrms Cap-Less Line Driver A1semi
AS998 Current Mode Controllers Astec
AS9C25128M2036L 2.5V 256/128K X 36 Synchronous Dual-port SRAM Alliance Semiconductor Corporation

Other Datasheets by Alliance Semiconductor

Part Number Description
AS91L1001 JTAG Test Controller
AS9F14G08SA-45BAN SLC Parallel NAND FLASH
AS9F14G08SA-45BIN SLC Parallel NAND FLASH
AS9F18G08SA-45BAN SLC Parallel NAND FLASH
AS9F18G08SA-45BIN SLC Parallel NAND FLASH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com July 2004 AS91L1006BU 6-Port JTAG Gateway Description The AS91L1006BU is a one to 6-port JTAG gateway. It partitions a single JTAG chain into six separate chains. These separate chains can be optionally configured to operate as a single chain. The AS91L1006BU device is used to provide enhanced capabilities to the standard IEEE1149.1. It enables the IEEE1149.1 interface to be used in a true Multi-Drop environment without any additional signals. This Multi-Drop capability enables the standard IEEE1149.1 interface to be used not just for stand alone PCB (Printed Circuit Board) testing, but also for complete system testing including all PCBs within a system back plane environment.
Published: |