Datasheet4U Logo Datasheet4U.com

ASM3P2869A Datasheet Low Power Peak Emi Reducing Solution

Manufacturer: Alliance Semiconductor Corporation

Overview: October 2005 .. rev 1.6 ASM3P2869A Low Power Peak EMI Reducing.

General Description

The ASM3P2869A is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies.

The ASM3P2869A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals.

The ASM3P2869A allows significant system cost savings by reducing the number of circuit board layers ferrite beads, shielding that are traditionally required to pass EMI regulations.

Key Features

  • Generates an EMI optimized clock signal at the output Integrated loop filter components Operates with a 3.3V /2.5V supply Operating current less than 4mA Low power CMOS design Input frequency range: 6MHz to 12MHz for 2.5V : 6MHz to 13MHz for 3.3V Generates a 1X low EMI spread spectrum clock of the input frequency Frequency deviation: ±1%(Typ) @ 10MHz Available in 6-pin TSOT-23, 8-pin SOIC and 8-pin TSSOP packages The ASM3P2869A uses the most.

ASM3P2869A from other manufacturers

See all manufacturers

Brand Logo Part Number Description Other Manufacturers
ON Semiconductor Logo ASM3P2869A Low Power Peak EMI Reducing Solution ON Semiconductor

More Datasheets from Alliance Semiconductor Corporation

Part Number Description
ASM3P2811A (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2811B (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2812A (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2812B (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2814A (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2814B (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2821B Low Power EMI Reduction IC
ASM3P2853A Peak EMI Reducing Solution
ASM3P2870A Low Power Peak EMI Reducing Solution
ASM3P2872A Low Power Peak EMI Reducing Solution

ASM3P2869A Distributor