The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
RoHS
AC50
Axial Coated Inductors
Dimensions:
Inches (mm)
22AWG
1.15 NOMINAL
0.375 MAX. (9.52)
1.15 NOMINAL
0.175 (4.44) MAX.
Features • Incorporation of a special lead wire configuration eliminating defects inherent in exisitng Axial leaded products such as open coil. High Current Capacity Expanded operating temp range Low DC Resistance Available on tape and Reel or Ammo Pack for Auto placement. Electrical Inductance Range: 1.0µh to 10,000µh Tolerance: 10% over entire range Available in tighter tolerances Test Frequency: as noted in table Operating Temp: -55ºC ~ +125ºC Current Rating: Based on a 10% drop in L from initial value. Part temperature should not exceed 125ºC
Allied Part Number
Inductance (µh)
Tolerance (%)
Q Min.
Test Freq. (MHz)
SRF (MHz)
DCR Max.
AC50 Datasheet