High saturation core material used for high inductance and low DCR. Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of < 10% of Initial value. Operating Temp: -55ºC to + 125ºC Test Procedures: L measured on CH-100 @ 1KHz DCR m.
The following content is an automatically extracted verbatim text
from the original manufacturer datasheet and is provided for reference purposes only.
View original datasheet text
RoHS
Axial Power Chokes
APC30
Dimensions:
Inches (mm)
20 AWG
1.15 NOMINAL (29)
0.92 (23.37)
1.15 NOMINAL (29)
0.47 (11.94)
Allied Part Number
Inductance (µh)
Tolerance (%)
DCR Max. (Ω)
Saturation Current (A)
Rated Current (A)
Features • Axial pre-tinned leads. • Protected with UL shrink tubing. • Non standard values and tolerances available. • High saturation core material used for high inductance and low DCR. Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of < 10% of Initial value. Operating Temp: -55ºC to + 125ºC Test Procedures: L measured on CH-100 @ 1KHz DCR measured on CH-301. Physical Packaging: 200 pieces per tape and reel.
APC30 Datasheet