Datasheet4U Logo Datasheet4U.com

AOZ1353DI - Smart Current-Limited Load Switch

Description

The AOZ1353DI is a current-limited load switch targeting applications that require comprehensive protections.

The input operating voltage range is between 3.4V and 5.5V.

The output terminal is rated 28V absolute maximum.

Features

  • very low quiescent current of 80µA. The supply current reduces to less than 1µA in shut- down. It also has under-voltage lockout (UVLO), over- voltage protection (OVP) and thermal shutdown protection. The AOZ1353DI has True Reverse-Current Blocking (TRCB) protection to avoid undesired reverse-current from VOUT to VIN. The device features fast recovery to turn on power switch once reverse current blocking protection is de-activated. The AOZ1353DI is available in 3mm x 3mm DFN-12L package. Featur.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AOZ1015 EZBuck 1.5A Synchronous Buck Regulator Alpha and Omega Semiconductors
AOZ1017 EZBuck 3A Simple Regulator Alpha and Omega Semiconductors
AOZ1018 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1019 EZBuck 2A Simple Regulator Alpha and Omega Semiconductors
AOZ1020 2A Synchronous Buck Regulator Alpha and Omega Semiconductors

Other Datasheets by Alpha & Omega Semiconductors

Part Number Description
AOZ1353LI 5V/3A Protection Switch
AOZ1356DI 5V/3.5A Protection Switch Supporting USB PD Fast Role Swap
AOZ1356LI Protection Switch
AOZ1358LI-01 5V Smart Protection Switch
AOZ1300 Programmable 4A Power Distribution Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ALPHA & OMEGA SEMICONDUCTOR AOZ1353DI 5V/3.5A ECPower™ Smart Current-Limited Load Switch with True Reverse-Current Blocking General Description The AOZ1353DI is a current-limited load switch targeting applications that require comprehensive protections. The input operating voltage range is between 3.4V and 5.5V. The output terminal is rated 28V absolute maximum. The internal current-limiting circuit protects the supply from large load current. The current limit level is set with an external resistor. The soft-start circuit controls inrush current due to highly capacitive loads. The soft-start time can be optionally adjusted with an external capacitor. The device features very low quiescent current of 80µA. The supply current reduces to less than 1µA in shut- down.
Published: |