AOZ13937DI-01 Datasheet | Alpha & Omega Semiconductors

Description AOZ13937DI is protection switch intended for applications that require reverse current protection. The input operating voltage range is from 3.4 V to 32 V, and both VIN and VOUT terminals are rated at 39 V absolute maximum. The power switch is capable for 20 A surge current for 10 ms. AOZ13937DI provides under-voltage lockout, over-voltage, reverse-current, and over-temperature protection. The FLTB pin flags thermal shutdown and over-voltage faults. AOZ13937DI is the ideal solution for multi-port Type-C PD current application. The Ideal Diode True Reverse Current Blocking (IDTRCB) feature prevents VIN to rise due to reverse current flow from VOUT under all conditions. An internal soft-start circuit controls inrush current due to highly capacitive loads and the slew rate can be adjusted using an external capacitor. The integrated back-to-back MOSFET offer industry’s lowest ON resistance and highest SOA to safely handle high current and wide range of output capacitances on VOUT. Features - 8 A continuous current - 20 A peak current for 10 ms @ 2% duty cycle - 20 mΩ typical ON resistance - 3.4 V to 32 V operating input voltage - VIN and VOUT are rated 39 V Abs max - Ideal Diode True Reverse Current Blocking (IDTRCB) - Programmable Soft-Start - VIN Under-Voltage Lockout (UVLO) - Programmable VIN Over-Voltage Lockout (OVLO) - Thermal Shutdown Protection - Startup Short Circuit Protection - Fault Recovery - AOZ13937DI-01: Auto-Restart - AOZ13937DI-02: Latch-Off - IEC 61000-4-2: ±8 k V contact discharge, ±15 k V air discharge on VIN and VOUT - IEC 61000-4-5: 50 V on VIN and VOUT, no Cap The AOZ13937DI is available in a thermally enhanced 3 mm x 3 mm DFN-12L package which can operate over -40 °C to +125 °C junction temperature range. Applications - Thunderbolt/USB Type-C PD power switch - Notebook puters - Docking Stations / Dongles - Power ORing Applications Typical Application Electrically Isolated Thermal Pad VBUS USB Connector TVS Diode CIN...