AZ5Y-1C-24DSE Datasheet | ZETTLER Electronics

FEATURES - - - - - - - - - - Subminiature size for high density packaging Coil sensitivity to 100 m W Extremely low cost Coils to 24 VDC Epoxy sealed for automatic wave soldering 1 Amp and 2 Amp contacts Life expectancy to 10 million operations Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL file E43203; CSA file 74120 GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 10 million operations Standard Duty: 5 x 105 at 1 A, 30 VDC Res. 4 x 105 at 0.5 A, 120 VAC Res. Heavy Duty: 2 x 105 at 2 A, 30 VDC Res. 2 x 105 at 1 A, 120 VAC Res. Standard: 3 ms at nominal coil voltage Sensitive: 5 ms at nominal coil voltage 1 ms at nominal coil voltage (with no coil suppression) Coil to contact: 3.0 p F Contact to contact: 3.0 p F At 10 m A contact current 2 ms at operate 8 ms at release CONTACTS Arrangement Ratings Light Duty SPDT (1 Form C) Welded crossbar construction Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1 A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 1 A at 30 VDC 0.5 A at 120 VAC Max. switched power: 60 W or 120 VA Max. switched current: 2A Max. switched voltage: 150 VDC or 300 VAC UL Rating: 2 A at 30 VDC 1 A at 120 VAC Silver palladium, gold clad Silver nickel < 50 milliohms initially Operate Time (typical) Release Time (typical) Capacitance Bounce (typical) Heavy Duty Material Light Duty Heavy Duty Resistance Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 500 Vrms between open contacts Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard: -25°C (-13°F) to 60°C (140°F) Sensitive: -25°C (-13°F) to 75°C (167°F) Both: -25°C (-13°F) to 105°C (221°F) 0.062" DA at 10- 55 Hz Standard: 10 g Sensitive: 6 g P.B.T....