AP1516 - 3A PWM Buck DC/DC Converter

Anachip

Datasheet Details

The Channel 1 is a step-down DC/DC converter, and own the ability of driving a 3A load without additional transistor component.

s.
Channel 1: simple switch - Adjustable version output voltage range, 1.23V to 18V+4% & Fixed 3.3V version - 150KHz +20% fixed switching frequency - Voltage mode non-synchronous PWM control - ON/OFF shutdown control input - Operating voltage can be up to 20V - Output load current: 3A - Low power standby mode.
Channel 2: ultra low drop regulator - Adjustable output voltage - 0.6V Maximum Dropout voltage at 1.0A Load current - Fast transient response - Good noise rejection.
Channel.

📁 AP1516 Similar Datasheet

AP1511 - PWM Control 5A Step-Down Converter (Anachip Corporation)
AP1501 - 3A PWM BUCK DC/DC CONVERTER (Diodes Incorporated)
AP1501A - 5A PWM BUCK DC/DC CONVERTER (Diodes)
AP1504MT - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
AP1505 - SINGLE END VOLTAGE MODE PWM CONTROLLER (ETC)
AP1506 - 3A PWM BUCK DC/DC CONVERTER (Diodes Incorporated)
AP1507 - 3A PWM BUCK DC/DC CONVERTER (Diodes Incorporated)
AP1509 - 2A PWM BUCK DC/DC CONVERTER (Diodes Incorporated)

Other Datasheets by Anachip

Published: May 19, 2007 |