Datasheet4U Logo Datasheet4U.com

AD8065 - FastFET Op Amps

General Description

The AD8065/AD80661 FastFET™ amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use.

The AD8065 is a single amplifier, and the AD8066 is a dual amplifier.

These amplifiers are developed in the Analog Devices, Inc.

Key Features

  • Qualified for automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AD82010 Mono Filter-less Digital Audio Amplifier ESMT
AD82050 Mono Digital Audio Amplifier ESMT
AD82088 Mono Digital Audio Amplifier ESMT
AD82088D 2x25W Stereo / 1x50W Mono Digital Audio Amplifier ESMT
AD82120 Mono Digital Audio Amplifier ESMT

Other Datasheets by Analog Devices

Part Number Description
AD8061 Rail-to-Rail Amplifiers
AD8062 Rail-to-Rail Amplifiers
AD8063 Rail-to-Rail Amplifiers
AD8066 FastFET Op Amps
AD8067 Op Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet FEATURES Qualified for automotive applications FET input amplifier 1 pA input bias current Low cost High speed: 145 MHz, −3 dB bandwidth (G = +1) 180 V/µs slew rate (G = +2) Low noise 7 nV/√Hz (f = 10 kHz) 0.6 fA/√Hz (f = 10 kHz) Wide supply voltage range: 5 V to 24 V Single-supply and rail-to-rail output Low offset voltage 1.5 mV maximum High common-mode rejection ratio: −100 dB Excellent distortion specifications SFDR −88 dBc @ 1 MHz Low power: 6.4 mA/amplifier typical supply current No phase reversal Small packaging: SOIC-8, SOT-23-5, and MSOP-8 GENERAL DESCRIPTION The AD8065/AD80661 FastFET™ amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use. The AD8065 is a single amplifier, and the AD8066 is a dual amplifier.