AD8118 Datasheet | Analog Devices

FEATURES High channel count, 32 × 32 high speed, nonblocking switch array Differential or single-ended operation Differential G = +1 (AD8117) or G = +2 (AD8118) Flexible power supplies Single +5 V supply, or dual ±2.5 V supplies Serial or parallel programming of switch array High impedance output disable allows connection of multiple devices with minimal loading on output bus Excellent video performance >50 MHz 0.1 d B gain flatness 0.05%/0.05° differential gain/phase error (RL = 150 Ω) Excellent ac performance Bandwidth: 600 MHz Slew rate: 1800 V/μs Settling time: 2.5 ns to 1% Low power of 2.5 W Low all hostile crosstalk < - 70 d B at 5 MHz < - 43 d B at 600 MHz Reset pin allows disabling of all outputs (connected through a capacitor to ground provides power-on reset capability) 304-ball BGA package (31 mm × 31 mm) APPLICATIONS Routing of high speed signals including RGB and ponent video routing KVM pressed video (MPEG, wavelet) Data munications GENERAL DESCRIPTION The AD8117/AD8118 are high speed, 32 × 32 analog crosspoint switch matrices. They offer 600 MHz bandwidth and slew rate of 1800 V/μs for high resolution puter graphics (RGB) signal switching. With less than - 70 d B of crosstalk and - 80 d B isolation (at 5 MHz), the AD8117/AD8118 are useful in many high speed applications. The 0.1 d B flatness greater than 50 MHz makes the AD8117/AD8118 ideal for posite video switching. The AD8117/AD8118 include 32 independent output buffers that can be placed into a high impedance state for paralleling crosspoint outputs so that off-channels present minimal loading to an output bus. The AD8117 has a differential gain of +1, while the AD8118 has a differential gain of +2 for ease of use in Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications...