ADA8282 Datasheet 4-Channel LNA and PGA

Manufacturer: Analog Devices

Datasheet Details

The ADA8282 is designed for applications that require low cost, low power, compact size, and flexibility.

The ADA8282 has four parallel channels, eachincluding anLNA and a PGA.

The LNA and PGA combine to form a signal chainthat

Data Sheet.

4 channels of low noise amplifiers (LNAs) followed by programmable gain amplifiers (PGAs) Minimum.
3 dB bandwidth of 5 MHz Typical.
3 dB bandwidth of 42.3 MHz Typical slew rate of 28 V/µs Differential input and output Gain of 18 dB to 36 dB in 6 dB steps Selectable low noise and low power modes Input referred noise of 4.5 nV/√Hz at 18.3 mW per channel Input referred noise of 3.8 nV/√Hz at 26.5 mW per channel Input referred noise of 3.6 nV/√Hz at 34.8 mW per channel Input referred.

Part Number	Description
ADA2200	Synchronous Demodulator and Configurable Analog Filter
ADA4000-1	(ADA4000-1/-2/-4) Low Cost Precision JFET Input Operational Amplifiers
ADA4000-2	(ADA4000-1/-2/-4) Low Cost Precision JFET Input Operational Amplifiers
ADA4000-4	(ADA4000-1/-2/-4) Low Cost Precision JFET Input Operational Amplifiers
ADA4001-2	Wide Bandwidth JFET Operational Amplifiers
ADA4004-1	(ADA4004-1/-2) Precision Single and Dual Amplifier
ADA4004-2	(ADA4004-1/-2) Precision Single and Dual Amplifier
ADA4004-4	Precision Quad Amplifier
ADA4051-1	Rail-to-Rail I/O Amplifier
ADA4051-2	Rail-to-Rail I/O Amplifier