Datasheet4U Logo Datasheet4U.com

ADE7762 - Polyphase Energy Metering

Description

The ADE7762 1 is a high accuracy polyphase electrical energy measurement IC.

The ADE7762 specifications surpass the accuracy requirements as quoted in the IEC62053-21 standard.

Patent pending.

Features

  • Polyphase Energy Metering IC with Phase Drop Indication ADE7762 The only analog circuitry used in the ADE7762 is in the analog-to-digital converters (ADCs) and reference circuit. All other signal processing (for example, multiplication, filtering, and summation) is carried out in the digital domain. This approach provides superior stability and accuracy over extremes in environmental conditions and over time. The ADE7762 supplies average active power information on the low frequency outputs, F1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADE-1 Frequency Mixer Mini-Circuits
ADE-1+ Frequency Mixer Mini-Circuits
ADE-10MH Frequency Mixer Mini-Circuits
ADE-11X+ Frequency Mixer Mini-Circuits
ADE-18W Frequency Mixer Mini-Circuits

Other Datasheets by Analog Devices

Part Number Description
ADE7760 Energy Metering
ADE7761 Energy Metering
ADE7761A Energy Metering
ADE7761B Energy Metering IC
ADE7763 Single-Phase Active and Apparent Energy Metering

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Preliminary Technical Data FEATURES Polyphase Energy Metering IC with Phase Drop Indication ADE7762 The only analog circuitry used in the ADE7762 is in the analog-to-digital converters (ADCs) and reference circuit. All other signal processing (for example, multiplication, filtering, and summation) is carried out in the digital domain. This approach provides superior stability and accuracy over extremes in environmental conditions and over time. The ADE7762 supplies average active power information on the low frequency outputs, F1 and F2. These logic outputs can be used to directly drive an electromechanical counter or to interface with an MCU. The CF logic output gives instantaneous active power information. This output is intended to be used for calibration purposes.
Published: |