33 V supply range
Fully specified at +12 V, ±15 V
130 Ω on resistance
No VL supply required
3 V logic-compatible inputs
16-lead TSSOP and 16-lead SOIC
Typical power consumption: <0.03 μW
Audio/video signal routing
The ADG1311/ADG1312/ADG1313 are monolithic CMOS
devices containing four independently selectable switches
designed on a CMOS process.
The ADG1311/ADG1312/ADG1313 contain four independent
single-pole/single-throw (SPST) switches. The ADG1311 and
ADG1312 differ only in that the digital control logic is inverted.
The ADG1311 switches are turned on with Logic 0 on the appro-
priate control input, while Logic 1 is required for the ADG1312.
The ADG1313 has two switches with digital control logic similar
to the ADG1311; the logic is inverted on the other two switches.
The ADG1313 exhibits break-before-make switching action for
use in multiplexer applications.
Each switch conducts equally well in both directions when on
and has an input signal range that extends to the supplies. In the
off condition, signal levels up to the supplies are blocked.
±15 V/12 V Quad SPST Switches
FUNCTIONAL BLOCK DIAGRAM
SWITCHES SHOWN FOR A LOGIC 1 INPUT
1. 3 V logic-compatible digital inputs: VIH = 2.0 V, VIL = 0.8 V.
2. No VL logic power supply required.
3. 16-lead TSSOP and SOIC packages.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
© 2005 Analog Devices, Inc. All rights reserved.