ADG5404F - 4-Channel Multiplexer

The ADG5404F is an analog multiplexer composed of four single channels with fault protected inputs.

The ADG5404F switches one of the four inputs to a common drain, D, as determined by the 2-bit binary address lines (A0 and A1).

An enable digital input, EN, is used to disable all the switches.

• Overvoltage protection up to.
• 55 V and +55 V Power-off protection up to.
• 55 V and +55 V Overvoltage detection on source pins Interrupt flags indicate fault status Low on resistance: 10 Ω (typical) On-resistance flatness of 0.5 Ω (maximum) 4 kV human body model (HBM) ESD rating Latch-up immune under any circumstance Known state without digital inputs present VSS to VDD analog signal range ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation Fully specified at ±1.