900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

ADH232S Datasheet

High Isolation SPDT Switch

No Preview Available !

High Isolation SPDT Switch
DC to 15 GHz Die
ADH232S
1.0 SCOPE
This specification documents the detail requirements for space qualified die per MIL-PRF-38534 class K
except as modified herein.
The manufacturing flow described in the SPACE DIE BROCHURE is to be considered a part of this
specification.
This datasheet specifically details the space grade version of this product. A more detailed operational
description and a complete datasheet for commercial product grades can be found at
www.analog.com/HMC232
2.0 Part Number. The complete part number(s) of this specification follow:
Part Number
HMC8800
Description
DC-15GHz High Isolation SPDT Switch Die
3.0 Die Information
3.1 Die Dimensions
Die Size
3.2 Die Picture
41 mil x 81 mil
Die Thickness
4 mil ± 0.5 mil
Control Input
Signal Path State
A
B
RFC to RF1
RFC to RF2
High
Low
Low
High
ON
OFF
OFF
ON
Caution: Do not “Hot Switch” power levels greater than +26 dBm (VCTL = 0/-5 VDC)
Bond Pad and Backside
Metalization
Au
1. RF1*
2. A**
3. B**
4. RFC*
5. A**
6. B**
7. RF2*
8. A**
9. B**
10. A**
Die bottom must be connected to RF
ground
No connection required for unlabeled pads
* (DC coupled, matched to 50 ohms,
blocking cap required if RF line potential
not equal to 0V)
** Using any one of the A and any one of
the B Pads connection is acceptable
ASD0016558
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2019 Analog Devices, Inc. All rights reserved.


Analog Devices Semiconductor Electronic Components Datasheet

ADH232S Datasheet

High Isolation SPDT Switch

No Preview Available !

ADH232S
3.3 Absolute Maximum Ratings 1/
RF Input Power (Vctl = -5V) (0.5 – 15GHz) ............................................... +30dBm (@ +50C)
Control Voltage Range (A & B) ........................................................................ +1 V to -7.5 Vdc
Channel Temperature ...................................................................................................... 150C
Thermal resistance ........................................................................................................92C/W
Storage Temperature.......................................................................................-65C to +150C
Operating Temperature......................................................................................-55C to +85C
ESD Sensitivity (HBM) .................................................................................................Class 1A
Absolute Maximum Ratings Notes:
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum
levels may degrade performance and affect reliability.
4.0 Die Qualification
In accordance with class-K version of MIL-PRF-38534, Appendix C, Table C-II, except as modified
herein.
(a) Pre-screen test post assembly required prior to die qualification, to remove all assembly related
rejects.
(b) Mechanical Shock or Constant Acceleration not performed; die qualification is performed in an
open carrier.
(c) Interim and post burn-in electrical tests will include static tests screened at +25C only.
Table I - Dice Electrical Characteristics
Parameter
Symbol
Insertion Loss
IL
Isolation
Iso
Return Loss “On State”
S11(on)
Return Loss RF1, RF2 “Off State”
Input Power for 1dB Compression
S11(off)
IP1dB
Conditions
1/, 2/, 3/, 4/
50 Ω System
DC – 6 GHz
DC – 10 GHz
DC – 15 GHz
DC – 6 GHz
DC – 10 GHz
DC – 15 GHz
DC – 6 GHz
DC – 15 GHz
DC – 6 GHz
DC – 15 GHz
0.5 – 15 GHz
Limit
Min
50
45
40
17
9
12
9
21
Table I Notes:
1/ Limits apply at +25C only.
2/ Tested with VCTLA/B Low = -0.2V, High = -5V
3/ S-par data to be tabulated at 50MHz and every 1GHz, 1GHz to 15GHz. Pin = -25dBm
4/ P1dB shall be measured at 5GHz, 10GHz, 15GHz, Go-No-Go
Limit
Max
1.6
2.2
2.9
Units
dB
dB
dB
dB
dBm
ASD0016558 Rev. D | Page 2 of 4


Part Number ADH232S
Description High Isolation SPDT Switch
Maker Analog Devices
PDF Download

ADH232S Datasheet PDF






Similar Datasheet

1 ADH232S High Isolation SPDT Switch
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy