ADL5230 Datasheet | Analog Devices

FEATURES Operation from 400 MHz to 2700 MHz Gain of +13.7 d B Gain at 2140 MHz OIP3 of+42.0 d Bm at 2140 MHz P1d B +25.6 d Bm at 2140 MHz Noise Figure of 4.2 d B at 2140 MHz 5V power supply 104 m A Power Supply Current Internal Active Biasing Thermally Efficient SOT-89 Package 400 MHz to 2700 MHz Pre-driver RF Amplifier ADL5320 FUNCTIONAL BLOCK DIAGRAM (2) ADL5320 GENERAL DESCRIPTION The ADL5320 is a broadband, linear pre-driver RF amplifier that operates at frequencies from 400 MHz to 2700 MHz. The device can be used in a wide variety of wired and wireless applications, including ISM, WLL, PCS, GSM, CDMA and WCDMA. The ADL5320 operates with 5V supply voltage with a supply current of 104 m A. The ADL5320 is fabricated on a Ga As HBT process. The device is packaged in a low-cost SOT-89 that uses an exposed paddle for excellent thermal impedance. It operates from - 40°C to +85°C. A fully populated evaluation board is also available. Bias RFin GND RFout Figure 1. Rev. Pr B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 .analog. Fax: 781.461.3113 ©2007 Analog Devices, Inc. All rights reserved. ADL5320 TABLE OF CONTENTS Features 1 General Description 1 Functional Block Diagram 1 Revision History...