Datasheet4U Logo Datasheet4U.com

ADL5811 - IF Amplifier and Wideband LO Amplifier

General Description

The ADL5811 uses revolutionary new broadband, square wave limiting, local oscillator (LO) amplifiers to achieve an unprecedented radio frequency (RF) bandwidth of 700 MHz to 2800 MHz.

Key Features

  • RF frequency: 700 MHz to 2800 MHz continuous LO frequency: 250 MHz to 2800 MHz, high-side or low-side inject IF range: 30 MHz to 450 MHz Power conversion gain of 7.5 dB at 1900 MHz SSB noise figure of 10.7 dB at 1900 MHz Input IP3 of 27.5 dBm at 1900 MHz Input P1dB of 12.7 dBm at 1900 MHz Typical LO drive of 0 dBm Single-ended, 50 Ω RF port Single-ended or balanced LO input port Single-supply operation: 3.6 V to 5.0 V Serial port interface control on all functions Exposed paddle 5 mm × 5 mm, 32-.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High IP3, 700 MHz to 2800 MHz, Double Balanced, Passive Mixer, IF Amplifier, and Wideband LO Amplifier ADL5811 FEATURES RF frequency: 700 MHz to 2800 MHz continuous LO frequency: 250 MHz to 2800 MHz, high-side or low-side inject IF range: 30 MHz to 450 MHz Power conversion gain of 7.5 dB at 1900 MHz SSB noise figure of 10.7 dB at 1900 MHz Input IP3 of 27.5 dBm at 1900 MHz Input P1dB of 12.7 dBm at 1900 MHz Typical LO drive of 0 dBm Single-ended, 50 Ω RF port Single-ended or balanced LO input port Single-supply operation: 3.6 V to 5.