ADM483 Datasheet Slew-Rate Limited RS-485/RS-422 Transceiver

Manufacturer: Analog Devices

ADM483 slew-rate limited rs-485/rs-422 transceiver by Analog Devices - Datasheet Preview

Datasheet Details

Part number	ADM483
Manufacturer	Analog Devices
File Size	252.90 KB
Description	Slew-Rate Limited RS-485/RS-422 Transceiver
Datasheet	ADM483 Datasheet

General Description

The ADM483 is a low power differential line transceiver suitable for half-duplex data communication on multipoint bus transmission lines.

It is designed for balanced data transmission, and complies with EIA Standards RS-485 and RS-422.The part contains a differential line driver and a differential line receiver.

Both share the same differential pins, with either the driver or the receiver being enabled at any given time.

Overview

www.DataSheet4U.com 5 V Low Power, Slew-Rate Limited RS-485/RS-422 Transceiver.

Key Features

EIA RS-485/RS-422-compliant Data rates up to 250 kbps Slew-rate limited for low EMI 100 nA supply current in shutdown mode Low power consumption (120 µA) Up to 32 transceivers on one bus Outputs high-z when disabled or powered off.
7 V to +12 V bus common-mode range Thermal shutdown and short-circuit protection Pin-compatible with MAX483 Specified over.
40°C to +85°C temperature range Available in 8-lead SOIC package.

More Datasheets from Analog Devices

Part Number	Description
ADM483E	RS-485 Transceiver
ADM485	5V Low Power EIA RS-485 Transceiver
ADM4850	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4851	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4852	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4853	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4854	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4855	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4856	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers
ADM4857	Half-Duplex and Full-Duplex RS-485/RS-422 Transceivers