All-in-one synchronous buck driver
Bootstrapped high-side drive
One PWM signal generates both drives
Anticross-conduction protection circuitry
Output disable control turns off both MOSFETs to float
output per Intel® VRM 10 specification
Multiphase desktop CPU supplies
Single-supply synchronous buck converters
Dual Bootstrapped, 12 V MOSFET
Driver with Output Disable
The ADP3110 is a dual, high voltage MOSFET driver optimized
for driving two N-channel MOSFETs, which are the two
switches in a nonisolated synchronous buck power converter.
Each of the drivers is capable of driving a 3000 pF load with a
25 ns propagation delay and a 30 ns transition time. One of the
drivers can be bootstrapped and is designed to handle the high
voltage slew rate associated with floating high-side gate drivers.
The ADP3110 includes overlapping drive protection to prevent
shoot-through current in the external MOSFETs.
The OD pin shuts off both the high-side and the low-side
MOSFETs to prevent rapid output capacitor discharge during
The ADP3110 is specified over the commercial temperature
range of 0°C to 85°C and is available in an 8-lead SOIC_N
SIMPLIFIED FUNCTIONAL BLOCK DIAGRAM
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
©2005 Analog Devices, Inc. All rights reserved.