900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

ADRF5042 Datasheet

Silicon SP4T Switch

No Preview Available !

Data Sheet
Nonreflective, 100 MHz to 44 GHz
Silicon SP4T Switch
ADRF5042
FEATURES
Ultrawideband frequency range: 100 MHz to 44 GHz
Nonreflective 50 Ω design
Low insertion loss
1.8 dB up to 18 GHz
2.8 dB up to 40 GHz
3.2 dB up to 44 GHz
High isolation
50 dB up to 18 GHz
39 dB up to 40 GHz
35 dB up to 44 GHz
High input linearity
P0.1dB: 26 dBm typical
IP3: 47 dBm typical
High power handling
24 dBm through path
24 dBm terminated path
All off state control
Logic select control
No low frequency spurs
Settling time (0.1 dB final RF output): 30 ns
24-terminal, 3 mm × 3 mm land grid array (LGA) package
Pin compatible with ADRF5043, low frequency cutoff version
APPLICATIONS
Industrial scanners
Test instrumentation
Cellular infrastructure—millimeterwave (mmWave) 5G
Military radios, radars, electronic counter measures (ECMs)
Microwave radios and very small aperture terminals (VSATs)
GENERAL DESCRIPTION
The ADRF5042 is a nonreflective SP4T switch manufactured in
the silicon on insulator (SOI) process.
The ADRF5042 operates from 100 MHz to 44 GHz with an
insertion loss of lower than 3.2 dB and an isolation of higher
than 35 dB. The device has a RF input power handling
capability of 24 dBm for both through and terminated paths.
The ADRF5042 requires a dual-supply voltage of +3.3 V and
−3.3 V. The device employs CMOS- and low voltage transistor
to transistor logic (LVTTL)-compatible controls.
FUNCTIONAL BLOCK DIAGRAM
EN 1
V1 2
GND 3
RFC 4
GND 5
VSS 6
LS 7
50Ω
50Ω
50Ω
50Ω
19 GND
18 RF2
17 GND
16 GND
15 GND
14 RF3
13 GND
Figure 1.
The ADRF5042 has enable and logic select controls to feature
all off state and port mirroring, respectively.
The ADRF5042 is pin compatible with the ADRF5043 low
frequency cutoff version, which operates from 9 kHz to 44 GHz.
The ADRF5042 comes in a 24-terminal, 3 mm × 3 mm, RoHS
compliant, land grid array (LGA) package and can operate from
−40°C to +105°C.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2020 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com


Analog Devices Semiconductor Electronic Components Datasheet

ADRF5042 Datasheet

Silicon SP4T Switch

No Preview Available !

ADRF5042
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
Thermal Resistance ...................................................................... 5
Electrostatic Discharge (ESD) Ratings ...................................... 5
Power Derating Curves................................................................ 5
ESD Caution.................................................................................. 5
REVISION HISTORY
7/2020—Revision 0: Initial Version
Data Sheet
Pin Configuration and Function Descriptions..............................6
Interface Schematics .....................................................................6
Typical Performance Characteristics ..............................................7
Insertion Loss, Return Loss, and Isolation ................................7
Input Power Compression and Third-Order Intercept............9
Theory of Operation ...................................................................... 10
Application Information................................................................ 11
Evaluation Board ........................................................................ 11
Outline Dimensions ....................................................................... 12
Ordering Guide .......................................................................... 12
Rev. 0 | Page 2 of 12


Part Number ADRF5042
Description Silicon SP4T Switch
Maker Analog Devices
PDF Download

ADRF5042 Datasheet PDF






Similar Datasheet

1 ADRF5040 Nonreflective Switch
Analog Devices
2 ADRF5042 Silicon SP4T Switch
Analog Devices
3 ADRF5043 Silicon SP4T Switch
Analog Devices
4 ADRF5044 SP4T Switch
Analog Devices
5 ADRF5045 SP4T Switch
Analog Devices
6 ADRF5046 Silicon SP4T Switch
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy