900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

ADuCM310 Datasheet

Precision Analog Microcontroller

No Preview Available !

Data Sheet
Precision Analog Microcontroller, Tunable
Optical Control Microcontroller
ADuCM310
FEATURES
External 16 MHz crystal option
Analog input/output
22-channel, 14-bit, 800 kSPS analog-to-digital
converter (ADC)
10 external channels
1 on-chip die temperature monitor
6 current output digital-to-analog converter (IDAC)
monitor channels
3 power monitor channels
2 buffered reference output channels
Fully differential and single-ended modes
0 V to 2.5 V analog input range
6 low noise, 12-/14-bit IDAC outputs
1× 250 mA, 1× 200 mA, 2× 100 mA, and 2× 20 mA
Semiconductor optical amplifier (SOA) IDAC pull-down
to −3.0 V for fast current sink
Eight 12-bit voltage output DACs (VDACs)
Channel 0 and Channel 1: 0 V to 3 V, 75 Ω load
Channel 2 and Channel 3: −5 V to 0 V, 500 Ω load
Channel 4 and Channel 5: 0 V to 3 V, 300 Ω load
Channel 6: 0 V to 5 V, 500 Ω load
Channel 7: 0 V to 5 V, 100 Ω load
2.5 V, on-chip voltage reference
2 buffered 2.5 V outputs
Microcontroller
ARM Cortex-M3 processor, 32-bit RISC architecture
Serial wire port supports code download and debugging
Clocking options
Trimmed on-chip oscillator (±3%)
External clock source
Memory
2× 128 kB Flash/EE memories, 32 kB SRAM
In-circuit download, SW-DP-based debugging
Software triggered in-circuit reprogrammability
On-chip peripherals
UART, 2× I2C and 2× SPI serial input/output
28-pin general-purpose input/output (GPIO) port
3 general-purpose timers
Wake-up (W/U) timer
Watchdog timer (WDT)
32-element programmable logic array (PLA)
Vectored interrupt controller
Interrupt on edge or level external pin inputs
9× external interrupts
Power
Multiple supplies
5 V for VDAC6 and VDAC7
3.3 V for digital and analog inputs/outputs
1.8 V to 2.7 V for IDACs
−5 V supply for IDAC3 and VDAC2/VDAC3
Package and temperature range
6 mm × 6 mm, 112-ball CSP_BGA package
Fully specified for −10°C to +85°C ambient operation
Tools
QuickStart™ development system
Full third party support
APPLICATIONS
80 MHz phase-locked loop (PLL)
Optical modules—tunable laser modules
FUNCTIONAL BLOCK DIAGRAM
AIN0
AIN9
VREF_1.2
BUF_VREF2.5A
BUF_VREF2.5B
VDAC0
VDAC7
IDAC0
IDAC5
MUX BUF
14-BIT
SAR
ADC
32.786kHz
16MHz OSC
80MHz PLL
INTERNAL CHANNELS,
IDACs, TEMPERATURE,
SUPPLIES
2.5V BAND
GAP VREF
VDAC
VDAC
IDAC
IDAC
ADuCM310
ARM
CORTEX-M3
PROCESSOR
MEMORY
256k FLASH
32k SRAM
DMA
NVIC
PLA
32 × ELEMENTS
POR
ON-CHIP
1.8V LDO
GPIO PORTS
UART PORT
2 × SPI PORT
2 × I2C PORT
EXT IRQs
3 × GP TIMER
WD TIMER
W/U TIMER
PWM
SERIAL
WIRE
RESET
IOVDDx
PVDD_IDACx
AVDDx
DGNDx
PGND
GENERAL-
PURPOSE
I/O PORTS
SWDIO
SWCLK
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com


Analog Devices Semiconductor Electronic Components Datasheet

ADuCM310 Datasheet

Precision Analog Microcontroller

No Preview Available !

ADUCM310* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADuCM310 Evaluation Board
DOCUMENTATION
Application Notes
AN-1160: Cortex-M3 Based ADuCxxx Serial Download
Protocol
AN-1322: ADuCM320 Code Execution Speed
Data Sheet
ADuCM310: Precision Analog Microcontroller, Tunable
Optical Control Microcontroller Data Sheet
User Guides
UG-549: How to Set Up and Use the ADuCM310
UG-829: ADuCM310 Development Systems Getting
Started Tutorial
TOOLS AND SIMULATIONS
ADuCM310 CMSIS Pack
DESIGN RESOURCES
ADuCM310 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADuCM310 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.


Part Number ADuCM310
Description Precision Analog Microcontroller
Maker Analog Devices
Total Page 28 Pages
PDF Download

ADuCM310 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 ADuCM310 Precision Analog Microcontroller
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy