Datasheet4U Logo Datasheet4U.com

HMC8073 - Silicon Digital Step Attenuator

General Description

The HMC8073 is a 6-bit digital step attenuator (DSA), operating from 0.6 GHz to 3.0 GHz, that

Key Features

  • Attenuation range: 0.5 dB LSB steps to 31.5 dB Low insertion loss 1.1 dB to 1.0 GHz 1.5 dB to 2.0 GHz Tight attenuation accuracy Less than ±0.25 dB (plus 3% of attenuation state) Low phase shift error: 4° phase shift to 1.0 GHz Bidirectional use: 30 dBm high power handling Internal dc block on the RFIN/RFOUT pins High linearity P1dB: 31 dBm typical Input IP3: 52 dBm typical Safe state transitions Serial interface with TTL/CMOS Up to 8 devices on a single data bus Single-supply operation: 3.3 V t.

📥 Download Datasheet

Full PDF Text Transcription for HMC8073 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for HMC8073. For precise diagrams, and layout, please refer to the original PDF.

Data Sheet 0.6 GHz to 3.0 GHz, 0.5 dB LSB, 6-Bit, Silicon Digital Step Attenuator HMC8073 FEATURES Attenuation range: 0.5 dB LSB steps to 31.5 dB Low insertion loss 1.1 d...

View more extracted text
ttenuation range: 0.5 dB LSB steps to 31.5 dB Low insertion loss 1.1 dB to 1.0 GHz 1.5 dB to 2.0 GHz Tight attenuation accuracy Less than ±0.25 dB (plus 3% of attenuation state) Low phase shift error: 4° phase shift to 1.0 GHz Bidirectional use: 30 dBm high power handling Internal dc block on the RFIN/RFOUT pins High linearity P1dB: 31 dBm typical Input IP3: 52 dBm typical Safe state transitions Serial interface with TTL/CMOS Up to 8 devices on a single data bus Single-supply operation: 3.3 V to 5.

More Datasheets from Analog Devices

Part Number Description
HMC807LP6CE FRACTIONAL-N PLL
HMC800LP3E GaAs MMIC
HMC801LP3E GaAs MMIC
HMC802ALP3E 20dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR
HMC802LP3E GaAs MMIC
HMC8038 Nonreflective Switch
HMC8100LP6JE Intermediate Frequency Receiver
HMC8118 E-Band I/Q Upconverter
HMC8119 E-Band I/Q Upconverter
HMC8120 E-Band Variable Gain Amplifier