OP292 - DUAL/QUAD SINGLE SUPPLY OPERATIONAL AMPLIFIER
Analog Devices
General Description
The OP292/OP492 are low cost, general-purpose dual and quad operational amplifiers designed for single-supply applications and are ideal for 5 V systems.
Key Features
Single-supply operation: 4.5 V to 33 V Input common-mode includes ground Output swings to ground High slew rate: 3 V/μs High gain bandwidth: 4 MHz Low input offset voltage High open-loop gain No phase inversion.
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
OP292. For precise diagrams, and layout, please refer to the original PDF.
Data Sheet FEATURES Single-supply operation: 4.5 V to 33 V Input common-mode includes ground Output swings to ground High slew rate: 3 V/μs High gain bandwidth: 4 MHz Low...
View more extracted text
swings to ground High slew rate: 3 V/μs High gain bandwidth: 4 MHz Low input offset voltage High open-loop gain No phase inversion APPLICATIONS Disk drives Mobile phones Servo controls Modems and fax machines Pagers Power supply monitors and controls Battery-operated instrumentation GENERAL DESCRIPTION The OP292/OP492 are low cost, general-purpose dual and quad operational amplifiers designed for single-supply applications and are ideal for 5 V systems. Fabricated on Analog Devices, Inc., CBCMOS process, the OP292/OP492 series has a PNP input stage that allows the input voltage range to include ground. A BiCMOS output stag
OP292 Datasheet
