Datasheet4U Logo Datasheet4U.com

AK7841 - Monaural Audio Class-D Amp

Description

The AK7841 is a Monaural Class-D amplifier for driving Piezo-Electric Speakers.

Its built-in power boost DCDC converter generates adequate high voltage for driving Piezo Speaker from a Li-Ion battery.

Features

  • Class-D Amplifier :.
  • Piezo-Electric Speaker Driver.
  • Analog Monaural signal input for both single and Differential-ended.
  • Monaural BTL output.
  • Output voltage = 12Vpp @VDD1=8.75V.
  • Filter-less solution.
  • Pop noise free architecture during power up or down.
  • Output short protection.
  • Boost DCDC Converter ：.
  • Input voltage = 2.7V ∼ 4.5V Æ Output voltage = 8.75V.
  • Over-current protection.
  • Over-volt.

📥 Download Datasheet

Datasheet Details

Part number AK7841
Manufacturer Asahi Kasei Microsystems
File Size 508.71 KB
Description Monaural Audio Class-D Amp
Datasheet download datasheet AK7841 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AK7864A 3 channel LED driver AKM
AK7 Ultra-Low Jitter 7.0 x 5.0mm XO ABRACON
AK7401 Rotary Position Sensor AKM
AK7451 Zero Latency Angle Sensor AKM
AK7452 Zero Latency Angle Sensor AKM

Other Datasheets by Asahi Kasei Microsystems

Part Number Description
AK7844 Stereo Audio Class-D Amp
AK7846 Stereo Audio Class-D Amp
AK7864 3 channel LED driver
AK7712 Built-in 20-bit ADC/DAC Sophisticated Audio DSP
AK7712A-VT Built-in 20-bit ADC/DAC Sophisticated Audio DSP

Full PDF Text Transcription

Click to expand full text
ASAHI KASEI [AK7841] www.DataSheet4U.com Monaural Audio Class-D Amp with Power Booster for PiezoSpeaker GENERAL DESCRIPTION The AK7841 is a Monaural Class-D amplifier for driving Piezo-Electric Speakers. Its built-in power boost DCDC converter generates adequate high voltage for driving Piezo Speaker from a Li-Ion battery. Output filter-less solution eliminates post LC-filters, which are normally required at Class-D outputs, and contributes to total space savings. Class-D operation ensures higher power efficiency. The AK7841 is the most appropriate for Cellular Phones with a piezo speaker. FEATURES □ Class-D Amplifier : • Piezo-Electric Speaker Driver • Analog Monaural signal input for both single and Differential-ended • Monaural BTL output • Output voltage = 12Vpp @VDD1=8.
Published: |