DD-xxxK Datasheet | Associated Components

FEATURES Highest current capacity per volume Low price pact size Good for auto insertion Available with cut & formed leads Available on Tape & Reel DD-1R0K DD-1R2K DD-1R5K DD-1R8K DD-2R2K DD-2R7K DD-3R3K DD-3R9K DD-4R7K DD-5R6K DD-6R8K DD-8R2K DD-100K DD-120K DD-150K DD-180K DD-220K DD-250K DD-270K DD-330K DD-390K DD-470K DD-560K DD-680K DD-820K DD-101K 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 12 15 18 22 25 27 33 39 47 56 68 82 100 120 150 180 220 250 270 330 390 470 560 680 820 1000 0.025 0.025 0.028 0.030 0.033 0.035 0.040 0.045 0.050 0.058 0.060 0.065 0.085 0.09 0.10 0.12 0.15 0.15 0.17 0.19 0.21 0.23 0.38 0.42 0.45 0.80 1.10 1.10 1.25 1.30 1.45 1.95 2.10 2.25 2.50 3.10 4.60 5.25 6.00 4.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.6 0.6 0.6 0.6 0.50 0.50 0.40 0.40 0.40 0.30 0.30 0.30 0.20 0.20 0.20 0.15 0.15 7.5 7.5 7.5 7.5 6.1 5.0 4.7 4.5 4.5 4.5 3.5 3.0 3.0 2.5 2.5 2.0 2.0 2.0 1.7 1.5 1.5 1.3 1.2 1.2 0.85 0.80 0.70 0.70 0.65 0.60 0.56 0.50 0.50 0.42 0.36 0.35 0.31 0.30 0.25 ELECTRICAL CHARACTERISTICS - Inductance range - Tolerance - Rated current - Testing procedures 1.0µH to 1000µH ±10% over entire range Based on value obtained when initial value changes within plus or minus 10% L & DCR are measured with Wayne Kerr Precision ponents Analyzer at 1 KHz and with 100 m VAC PHYSICAL CHARACTERISTICS Dielectric strength Operating temperature Terminal strength Resistance to solvents Construction Marking Packaging Data Shee 500 volts RMS . -55°C to +105°C DD-121K 5 lbs pull test per MIL-STD-202E DD-151K Conforms to MIL-STD-202 DD-181K Epoxy coated DD-221K 4 Band EIA color code DD-251K Bulk: 1000 pieces per bag DD-271K Reel: 2500 pieces per reel DD-331K DD-391K DD-471K DD-561K DIMENSIONS IN INCHES DD-681K DD-821K - Body length A 0.40" ±0.03"- DD-102K - Body diameter B 0.16" ±0.03"- - - Lead wire 22 AWG / TCW - Lead length 1.05" minimum NOTE - Actual body length is shorter. However, due to epoxy coating,...