SAMC21J15A
Description
The Atmel® | SMART™ SAM C21 is a series of microcontrollers optimized for industrial automation, appliances and other 5V applications using the 32-bit ARM® Cortex®-M0+ processor, ranging from 32- to 64-pins with up to 256KB Flash and 32KB of SRAM and operate at a maximum frequency of 48MHz and reach 2.46 CoreMark®/MHz. The SAM C21 devices are designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map and pin compatible migration paths between all devices in the product series.
Key Features
- Processor - ARM Cortex-M0+ CPU running at up to 48MHz
- Single-cycle hardware multiplier
- Micro Trace Buffer
- Memory Protection Unit (MPU)
- Memories - 32/64/128/256KB in-system self-programmable Flash - 1/2/4/8KB independent self-programmable Flash for EEPROM emulation - 4/8/16/32KB SRAM Main Memory
- System - Power-on reset (POR) and brown-out detection (BOD) - Internal and external clock options with 48MHz to 96MHz Fractional Digital Phase Locked Loop (FDPLL96M) - External Interrupt Controller (EIC) - 16 external interrupts - One non-maskable interrupt Atmel-42365E-SAM C21_Datasheet_Preliminary-12/2015 - Two-pin Serial Wire Debug (SWD) programming, test and debugging interface
- Low Power - Idle, standby, and off sleep modes - SleepWalking peripherals
- Peripherals - Hardware Divide and Square Root Accelerator (DIVAS) - 12-channel Direct Memory Access Controller (DMAC) - 12-channel Event System - Up to five 16-bit Timer/Counters (TC), configurable as either:
- One 16-bit TC with compar
