AP2820 Datasheet PDF (High-side Power Distribution Switch)

AP2820 - High-side Power Distribution Switch

Description

The AP2820 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits.

The switch’s low RDS(ON), 60mΩ, is designed to meet USB voltage drop requirements.

Features

Low MOSFET on Resistance: 60mΩ.
Compliant to USB Specifications.
Available 2 Versions of Load Ability: Guarantee 2.0A Continuous Load for A/B/C/D Version Guarantee 2.5A Continuous Load for E/F/G/H Version.
Logic Level Enable Pin: Available with Active-high or Active-low Version.
Operating Voltage Range: 2.7V to 5.5V.
Low Supply Current: 75μA (Typ. ) (For A/B/C/D versions) 80μA (Typ. ) (For E/F/G/H versions).
Low Shutdown Current: 1.0μ.

Datasheet Details

Part number	AP2820
Manufacturer	BCD
File Size	504.95 KB
Description	High-side Power Distribution Switch
Datasheet	AP2820 Datasheet

📁 Similar Datasheet

AP2820 - 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCH (DIODES)

AP2822 - 0.5A to 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCHES (DIODES)

AP2851GO - N- and P-Channel MOSFET (VBsemi)

AP2864I-A-HF - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP2864I-A-HF-3 - N-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

AP28G40GEH - N-CHANNEL INSULATED GATE BIPOLAR TRANSISTOR (Advanced Power Electronics)

AP28G40GEJ - N-CHANNEL INSULATED GATE BIPOLAR TRANSISTOR (Advanced Power Electronics)

AP28G40GEM-HF - N-CHANNEL INSULATED GATE BIPOLAR TRANSISTOR (Advanced Power Electronics)

AP28G40GEO - N-CHANNEL INSULATED GATE BIPOLAR TRANSISTOR (Advanced Power Electronics)

AP28G45EM - N-CHANNEL INSULATED GATE BIPOLAR TRANSISTOR (Advanced Power Electronics)

Full PDF Text Transcription

Click to expand full text

Advance Datasheet High-side Power Distribution Switch with Enable and Flag AP2820 General Description The AP2820 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS(ON), 60mΩ, is designed to meet USB voltage drop requirements. The IC includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller.

Published: Mar 18, 2015 |