AZV321 Datasheet | BCD Semiconductor

Preliminary Datasheet SINGLE LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER AZV321 General Description The AZV321 is single low voltage (2.7-5.5V) op amp which has rail-to-rail output swing capability. The input mon-mode voltage range includes ground. The chip exhibits excellent speed-power ratio, achieving 1MHz of bandwidth and 1V/µs of slew rate with low supply current. The AZV321 is built with Bi CMOS process. It has bipolar input and output stages for improved noise performance, low input offset and higher output current drive. AZV321 is available in the package of SC70-5, which is approximately half the size of SOT-23-5. The small package saves space on pc boards, and enables the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity. Features （For VCC=5V and VEE=0V, Typical unless Otherwise Noted） - Guaranteed 2.7V to 5.5V Performance. - No Crossover Distortion - Gain-Bandwidth Product 1MHz - Industrial Temperature Range: -40o C to +85o C - Low Supply Current: 130µA - Rail-to-Rail Output Swing under 10kΩ Load: VOH up to VCC -10m V VOL near to VEE +65m V - VCM: -0.2V to VCC-0.8V Applications - - - - - Active Filters Low Power, Low Voltage Applications General Purpose Portable Devices Cellular Phone, Cordless Phone Battery-Powered Systems AZV321 is also available in standard SOT-23-5 package. .. SC70-5 SOT-23-5 Figure 1. Package Types of AZV321 Mar. 2007 Rev. 1. 0 1 BCD Semiconductor Manufacturing Limited Preliminary Datasheet SINGLE LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER AZV321 Pin Configuration KS/K Package (SC70-5/SOT-23-5) IN+ VEE IN1 2 3 4 OUTPUT 5 VCC Figure 2. Pin Configuration of AZV321 (Top View) Functional Block...