Datasheet4U Logo Datasheet4U.com

IR420-D4 - Installation Bulletin / Reference Guide

Features

  • and settings in the IR420-D4’s main menu. Not all available features are listed in this document. For more information, consult the IR420-D4 user manual. Power OFF Power ON, alarm state Menu Legend DOWN ARROW button R 1.77” (45) Normally energized mode (N/E) Failsafe mode “N/C” in device settings menu Energized in the normal state Relay will switch when the alarm is activated, or when supply voltage to the device is lost. Power ON, normal state (no alarms) < 1.5 s > 1.5 s 3.54” (90) Wir.

📥 Download Datasheet

Datasheet preview – IR420-D4

Datasheet Details

Part number IR420-D4
Manufacturer BENDER
File Size 474.94 KB
Description Installation Bulletin / Reference Guide
Datasheet download datasheet IR420-D4 Datasheet
Additional preview pages of the IR420-D4 datasheet.

📁 Similar Datasheet

  • IR42-21C - 1.8MM ROUND SUBMINIATURE INFRARED LED (ETC)
  • IR423-3C - LED (Everlight Electronics)
  • IR4007K - Switched Power-Supply (International Rectifier)
  • IR4301 - Integrated analog input Class D audio amplifier (International Rectifier)
  • IR4302 - 2-Channel Integrated Analog Input Class D Audio Amplifier (International Rectifier)
  • IR4311 - Integrated analog input Class D audio amplifier (International Rectifier)
  • IR4312 - 2-Channel Integrated Analog Input Class D Audio Amplifier (International Rectifier)
  • IR4321 - Integrated analog input Class D audio amplifier (International Rectifier)
  • IR4322 - 2-Channel Integrated Analog Input Class D Audio Amplifier (International Rectifier)
  • IR44252LPBF - SOT-23 Single Low-Side Driver (International Rectifier)
Other Datasheets by BENDER
  • IR420-D4 - Digital Ground Fault Monitor / Ground Detector Ungrounded (Floating) AC Systems
  • IR420-D4-1 - Digital Ground Fault Monitor / Ground Detector Ungrounded (Floating) AC Systems
  • IR420-D4-2 - Digital Ground Fault Monitor / Ground Detector Ungrounded (Floating) AC Systems
  • IR423 - A-ISOMETER - Insulation monitoring device

Full PDF Text Transcription

Click to expand full text
TM Installation Bulletin / Reference Guide IR420-D4 This document is intended as a reference guide for installing and using a BENDER IR420-D4 ground fault detector. This document includes installation, setup, and usage instructions. For complete details, including installation, setup, settings, and troubleshooting, refer to the IR420-D4 user manual, document number TBP101012. This document is intended as a supplement and not a replacement to the complete user manual. Only qualified maintenance personnel shall operate or service this equipment. These instructions should not be viewed as sufficient for those who are not otherwise qualified to operate or service this equipment. This document is intended to provide accurate information only.
Published: |