n Bidirectional ESD protection
n Low clamping voltage
n Ultra-small SMD package
n RoHS compliant*
n Portable electronics
n Cellular handsets and accessories
n Audio & video equipment
n Communication systems
n Computers and peripherals
CD0201-T20C - Surface Mount TVS Diode
The Bourns® Model CD0201-T20C device provides signal and power line ESD
protection for electronic devices such as cellular phones, handheld electronics and
other portable electronic applications.
The device is available in a compact industry-standard 0201 sized chip package
(0603 metric measuring 0.6 mm x 0.3 mm). It is intended to be mounted directly onto
a printed circuit board.
The device is designed to meet IEC 61000-4-2 (ESD) protection requirements.
The combination of its small size and high ESD surge capability makes the Model
CD0201-T20C well-suited for use in protecting sensitive electronics from damage or
latch-up due to ESD in portable applications.
The Model CD0201-T20C TVS diode has a working peak voltage of 20 V.
Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)
Maximum Working Peak Reverse Voltage
ESD Protection per IEC 61000-4-2
Operating Temperature Range
Storage Temperature Range
-55 to +85
-55 to +150
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Min. Typ. Max.
ESD Clamping Voltage (Note 1)
IBR = 1 mA
VRWM = 20 V
IEC 61000-4-2 +8 kV
(ITLP = 16 A)
VR = 0 V, f = 1 MHz
Note 1: ESD Clamping Voltage was measured by a Transmission Line Pulsing (TLP) System. TLP conditions:
Z0= 50 Ω, tp= 100 ns, tr= 1 ns.
Asia-Pacific: Tel: +886-2 2562-4117 • Email: firstname.lastname@example.org
EMEA: Tel: +36 88 520 390 • Email: email@example.com
The Americas: Tel: +1-951 781-5500 • Email: firstname.lastname@example.org
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.