Non-isolated Buck Offline LED Driver
The BP2833D is a high precision buck constant
current LED driver. The device operates in critical
conduction mode and is suitable for 85Vac~265Vac
universal input offline LED lighting.
The BP2833D integrates a 500V power MOSFET.
With patent pending MOSFET driving technique, the
operating current of the IC is very low. So it doesn’t
need the auxiliary winding for supplying the chip. It
can achieve excellent constant current performance
with very few external components, so the system
cost and size are minimized.
The BP2833D utilizes patent pending current control
method. It can achieve precise output current and
excellent line regulation. The driver operates in
critical conduction mode, the output current does not
change with the inductance and LED output voltage.
The BP2833D offers rich protection functions to
improve the system reliability, including LED open
circuit protection, LED short circuit protection, VCC
under voltage protection, CS resistor short circuit
protection and thermal regulation function.
Critical Conduction Mode Operation
Internal 500V Power MOSFET
No Auxiliary Winding
Ultra Low Operating Current
±5% LED Output Current Accuracy
LED Open Protection
LED Short Protection
Current Sensing Resistor Short Protection
VCC Under Voltage Protection
Thermal Regulation Function
Available in DIP-8 Package
LED Ceiling Light
Other LED Lighting
4 VCC DRAIN 5
2 ROVP DRAIN 6
Figure 1. Typical application circuit for BP2833D
BPS Confidential – Customer Use Only