datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Baumer
Baumer

GXP8W Datasheet Preview

GXP8W Datasheet

Absolute encoders - bus interfaces

No Preview Available !

GXP8W pdf
Absolute encoders - bus interfaces
Shaft with clamping or synchro flange
Optical multiturn encoders 13 bit ST / 16 bit MT, DeviceNet
www.DataSheet4U.com
GXP8W - DeviceNet
Features
–– Encoder multiturn / DeviceNet
–– Optical sensing
–– Resolution: singleturn 13 bit, multiturn 16 bit
–– Clamping flange or synchro flange
–– High resistance to shock and vibrations
–– LED status display
–– Permanent check of code continuity
GXP8W with clamping flange
Technical data - electrical ratings
Voltage supply
10...30 VDC
Reverse polarity protection Yes
Consumption w/o load ≤50 mA (24 VDC)
Initializing time (typ.)
250 ms after power on
Interface
DeviceNet
Transmission rate
125...500 kBaud
Profile conformity
Device Profile Encoder V 1.0
Operating mode
I/O-Polling, Cyclic, Change of
State
Identifier
11 bit
Steps per turn
8192 / 13 bit
Number of turns
65536 / 16 bit
Absolute accuracy
±0.025°
Sensing method
Optical
Code
Binary
Code sequence
CW default, programmable
Output circuit
CAN bus standard ISO / DIS
11898
Interference immunity
DIN EN 61000-6-2
Emitted interference
DIN EN 61000-6-4
Programmable
parameters
Operating modes
Total resolution
Preset
Scaling
Diagnostic functions
Position or parameter error
Multiturn sensing
Status indicator
DUO-LED integrated in housing
Approval
UL approval / E63076
Technical data - mechanical design
Housing
Shaft
Flange
Protection DIN EN 60529
Operating speed
Starting torque
Rotor moment of inertia
Admitted shaft load
Materials
Operating temperature
Relative humidity
Resistance
Weight approx.
E-connection
ø58 mm
ø10 mm (clamping flange)
ø6 mm (synchro flange)
Clamping or synchro flange
IP 54 without shaft seal
IP 65 with shaft seal
≤10000 rpm (mechanical)
≤6000 rpm (electric)
≤0.015 Nm IP 54
≤0.03 Nm IP 65
20 gcm²
≤20 N axial
≤40 N radial
Housing: steel
Flange: aluminium
-25...+85 °C
-40...+85 °C (optional)
95 % non-condensing
DIN EN 60068-2-6
Vibration 10 g, 16-2000 Hz
DIN EN 60068-2-27
Shock 200 g, 6 ms
350 g
Connector
1 www.baumerivo.com



Baumer
Baumer

GXP8W Datasheet Preview

GXP8W Datasheet

Absolute encoders - bus interfaces

No Preview Available !

GXP8W pdf
www.DataSheet4U.com
Absolute encoders - bus interfaces
Shaft with clamping or synchro flange
Optical multiturn encoders 13 bit ST / 16 bit MT, DeviceNet
GXP8W - DeviceNet
Part number
GXP8W.
20 M1 10
Interface
10 DeviceNet
E-connection
M1 Connector M12, 5-pin, radial
Voltage supply
20 10...30 VDC
Flange / Shaft
0 Clamping flange / ø10 mm IP 54
A Clamping flange / ø10 mm IP 65
1 Synchro flange / ø6 mm IP 54
B Synchro flange / ø6 mm IP 65
Accessories
Connectors and cables (page %S)
Z 180.003 Female connector M12, 5-pin, 2 m cable
Z 180.005 Female connector M12, 5-pin, 5 m cable
Z 180.007 Female connector M12, 5-pin, 10 m cable
Mounting accessories (page %S)
Z 119.006 Eccentric fixing, single
Z 119.013 Adaptor plate for clamping flange for
modification into synchro flange
Z 119.015 Mounting adaptor for synchro flange
Z 119.017 Mounting angle for clamping flange
Z 119.035 Bearing flange for encoders with synchro
flange
DeviceNet features
Bus protocol
DeviceNet
Device profiles Device Profile for Encoders V 1.0
Operating mode
I/O-Polling
Cyclic
Change of State
Preset
Rotating direction
This parameter is for setting the encoder
to a requested position value assigned
to a defined shaft position of the system.
The offset between the encoder zero
point and the mechanical zero point is
stored in the encoder.
This parameter is for defining the
rotating direction in which there have to
be ascending or descending position
values.
Scaling
Parametering of steps per revolution
and of the total resolution.
Diagnosis
The encoder supports the following error
warnings:
- Position and parameter error
- Lithium battery voltage control
(Multiturn)
Default
125 kbit/s, Mac ID 63
2 www.baumerivo.com


Part Number GXP8W
Description Absolute encoders - bus interfaces
Maker Baumer
Total Page 4 Pages
PDF Download
GXP8W pdf
GXP8W Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 GXP8W Absolute encoders - bus interfaces Baumer
Baumer
GXP8W pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy