3K3A1W2 - Chip Thermistors

Key Features

Rapid Time Response (1.3 second typical in liquids).
DC (Dissipation Constant) = 2.0mW/oC typical in still air at 25oC.
Min. /Max. Temperature Exposure = -80oC to 150oC.
Available in custom probe assemblies.
Proven Stability and Reliability.
Larger lead wires ease assembly requirements. BetaCURVE Thermistor Series III are similar in construction to Series I except for the use of larger (30 AWG) copper leads. This allows the Dissipation Constant (D. C. ) to be rais.

3K3A1W2 chip thermistors by BetaTHERM - Datasheet Preview

Datasheet Details

Part number	3K3A1W2
Manufacturer	BetaTHERM
File Size	207.14 KB
Description	Chip Thermistors
Datasheet	3K3A1W2 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer

Other Datasheets by BetaTHERM

Part Number	Description
3K3A1W3	Chip Thermistors
3K3A1-25	Chip Thermistors
3K3A1A	Chip Thermistors
3K3A1B	Chip Thermistors
3K3A1C	Chip Thermistors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

BetaTHERM Sensors BetaCURVE Interchangeable Thermistor Series III BetaCURVE Interchangeable Thermistor Series III Applications ¥ Temperature sensing, control and compensation. ¥ Applied to applications where higher Dissipation Constant is required (2.0mW/oC). Thermistor Configuration 30 AWG Tin Plated Copper Alloy Lead Wires Thermally Conductive Epoxy Coating 2.413mm (0.095Ó) Max. Dia. 45.7mm +/-5.0mm (1.80Ó +/-0.20Ó) Example: BetaCURVE SeriesIII Part Number 10K 3 A 1 W2 2mW/oC Dissipation Constant BetaCURVE Series Epoxy Coated Material Curve # Resistance Value @ 25oC Features ¥ Rapid Time Response (1.3 second typical in liquids). ¥ DC (Dissipation Constant) = 2.0mW/oC typical in still air at 25oC. ¥ Min./Max. Temperature Exposure = -80oC to 150oC.