B-4353 Datasheet Recessed Sanutary Napkin Disposal

Manufacturer: Bobrick

Overview: www.DataSheet4U.com contura™ series Recessed sanitary napkin disposal B-4353 Rough Wall Opening 11-1/4" (285mm) wide 9-1/2" (240mm) high 4" (102mm) minimum recessed depth Patented MM MM 4YP 3 3 4YP MM &INISH&ACE OF7ALL 3TAINLESS 3TEEL $OOR 3 2EMOVABLE 7ASTE 2ECEPTACLE gg MM 3 MM 3 3 4YP MM MM MM 4YP 3 3 3 2ECOMMENDED-OUNTING(EIGHT/FF&LOORFOR5NIVERSAL"ARRIER &REE$ESIGN 3 3 MM gg MM 3 gg MM 4YP MM gg materials: Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin finish. Flange — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Radius on corners and return edges complement corners and edges of door. Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction. Front of door has same degree of arc as other Bobrick Contura Series washroom accessories. Radius on corners and edges of door complement other Contura Series accessories. Self-closing door is secured to cabinet with a spring-loaded, full-length stainless steel piano-hinge at bottom. Equipped with two stainless steel cable door-swing limiters, two hooks for retaining receptacle, a finger-pull recess at top for easy opening, and an international graphic symbol identifying sanitary napkin disposal. Receptacle — Leak-proof molded polyethylene. Removable for servicing. Equipped with two slots for hanging on door hooks. Capacity: 1.2-gal. (4.6-L). continued . . .

Datasheet Details

Part number	B-4353
Manufacturer	Bobrick
File Size	134.18 KB
Description	Recessed Sanutary Napkin Disposal
Datasheet	B-4353_Bobrick.pdf

General Description

s herein are applicable to production as of the date of this Technical Data Sheet.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.

Revised 11/06 Printed in U.S.A.

Key Features

that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4'' (4.2 x 32mm) sheet-metal screws (not furnished by manufacturer). specification: Recessed sani.

B-4353 Distributor

More Datasheets from Bobrick

Part Number	Description