900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Bourns Electronic Solutions

3314J-1-502G Datasheet Preview

3314J-1-502G Datasheet

4 mm Square Trimming Potentiometer

No Preview Available !

Features
Surface Mount / Single Turn / Cermet
Industrial / Sealed
Compatible with surface mount
manufacturing processes
Compatible with popular vacuum
pick-and-place equipment
J-hook, gull-wing and pinned
configurations
Side adjust available
Meets EIA/EIAJ/IPC/VECI SMD standard
trimmer designs
RoHS compliant* - see processing
information on lead free surface mount
trimmers
3314 - 4 mm Square Trimming Potentiometer
Electrical Characteristics
Standard Resistance Range
.......................10 ohms to 2 megohms
(see standard resistance table)
www.DataShReeest4isUt.acnocme
Tolerance ............±20 % std.
(tighter tolerance available)
End Resistance.......1 % or 2 ohms max.
(whichever is greater)
Contact Resistance Variation
......................................3 % or 3 ohms
Resolution.....................................Infinite
Insulation Resistance ................500 vdc.
100 megohms min.
Dielectric Strength
Sea Level.................500 vac (1 minute)
Adjustment Angle ..................210 ° nom.
Environmental Characteristics
Power Rating (300 volts max.)
70 °C......................................0.25 watt
125 °C.........................................0 watt
Temperature Range ....-55 °C to +125 °C
Temperature Coefficient ....±100 ppm/°C
Humidity .............................90-98 % RH,
10 cycles, 240 hours
TRS ±2 %; IR 10 megohms
Vibration ......20 G TRS ±1 %; VRS ±1 %
Shock ........100 G TRS ±1 %; VRS ±1 %
Load Life
.....(@ 70 °C Rated Power 1000 Hours)
TRS ±3 %
Rotational Life ........................100 cycles
TRS ±3 %
Thermal Shock ..........................5 cycles
TRS ±2 %; VRS ±1 %
Physical Characteristics
Mechanical Angle ..................240 ° nom.
Torque ..........................180 g-cm typical
Stop Strength ...............300 g-cm typical
Pushover Strength (Z Style)
.............2 kilograms (4.4 lbs.) minimum
Weight ................Approximately 0.01 oz.
Marking .................Manufacturer’s code,
resistance code and date code
Wiper................50 % (Actual TR) ±10 %
Flammability ...........................U.L. 94V-0
Standard Packaging
J, G and R ..................500 pcs./7 ” reel
S and Z.......................200 pcs./7 ” reel
H .....................................100 pcs./tube
Adjustment Tool ..............................H-90
TOLERANCES: ± 0.25 (.010) EXCEPT WHERE NOTED
DIMENSIONS ARE:
MM
(INCHES)
Product Dimensions
3314J-1
4.50
(.177)
2
2.55
(.100)
4.50
(.177)
0.20
(.008)
TYP.
3
5.00
(.197)
ADJ. SLOT
1
2.45
(.096)
LONG
X
.51
(.020)
WIDE
.51
X (.020)
DEEP
RECOMMENDED PCB
2.35 LAYOUT
(.093)
2.3
0.8 ± 0.1
(.031 ± .004)
2 PLCS.
(.091)
1.3
(.051)
2 PLCS.
1.0
(.040)
3 PLCS.
4.00
(.157)
5.00
(.197)
1.30 ± 0.1
(.051 ± .004)
2.0
(.079)
3 PLCS.
2.0
(.079)
3314G-1
4.50
(.177)
2
2.55
(.100)
0.20
(.008)
TYP.
4.50
(.177)
0.6
(.024)
TYP.
ADJ. SLOT 3
(2.0.4956) LONG
X (.0.5210) WIDE
X(..05210) DEEP
5° MAX.
TYP.
1
2.35
(.093)
RECOMMENDED PCB
LAYOUT
2.3
0.8 ± 0.1
(.031 ± .004)
2 PLCS.
(.091)
1.3
(.051)
2 PLCS.
6.20
(.244)
5.00
(.197)
1.3
(.051)
3 PLCS.
1.30 ± 0.1
(.051 ± .004)
5.5
(.217)
2.0
(.079)
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
3314J-1, G-1, R-1, H-1 3314J-2, G-2, R-2, H-2
(Bourns Marking,
(Bourns Marking,
Straight Slot)
Cross Slot)
22
31
31
3314J-3, G-3, R-3, H-3
(Reverse Marking,
Straight Slot)
2
3314J-4, G-4, R-4, H-4
(Reverse Marking,
Cross Slot)
2
31
31
How To Order
3314 J - 1 - 502 E
Model
Style
Standard or Modified Product
Indicator (Styles J, G, R, H & S)
-1 = Single Slot
-2 = Cross Slot
-3 = Single Slot w/Reverse Marking
-4 = Cross Slot w/Reverse Marking
Product Indicator (Style Z only)
-GA4 = Single Slot
-1 = Cross Slot
-3 = Single Slot w/Reverse Marking
-4 = Cross Slot w/Reverse Marking
Resistance Code
Embossed Tape Designator**
E = Styles J, G and R: 500 pcs./7 ” reel
Styles S and Z: 200 pcs./7 ” reel
G = Styles J and G: 3000 pcs./13 ” reel
Style R: 2500 pcs./13 ” reel
Styles S and Z: 1000 pcs./13 ” reel
**Style H is available in tube packaging only.
Standard Resistance Table
Resistance
(Ohms)
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
250,000
500,000
1,000,000
2,000,000
Resistance
Code
100
200
500
101
201
501
102
202
502
103
203
503
104
204
254
504
105
205
Popular distribution resistance values listed in
boldface. Special resistances available.




Bourns Electronic Solutions

3314J-1-502G Datasheet Preview

3314J-1-502G Datasheet

4 mm Square Trimming Potentiometer

No Preview Available !

Additional Features
Model 3314 has been approved for use
by DESC on drawings 88039 (3314J) and
90027 (3314G)
3314 - 4 mm Square Trimming Potentiometer
Product Dimensions
3314R-1
5.00
(.197)
www.DataSheet42U.com
6.20
(.244)
2.55
(.100)
0.51 ± 0.13
(.020 ± .005)
TYP.
4.50
(.177)
0.51 ± 0.13
(.020 ± .005)
TYP.
3
2.35
(.092)
6.20
(.244)
ADJ. SLOT
1
2.45
(.096)
LONG
X
0.51
(.020)
WIDE
0.20
(.008)
TYP.
R
0.13
(.005)
MAX.
TYP.
X
0.51
(.020)
DEEP
RECOMMENDED PCB
LAYOUT
2.3
0.80 ± 0.10
(.031 ± .004)
2 PLCS.
(.090)
1.3
(.051)
2 PLCS.
DIA.
3.2
(.126)
THRU.
5.5
(.216)
5.00
(.197)
1.30 ± 0.10
(.051 ± .004)
1.3
(.051)
2 PLCS.
2.0
(.079)
3314H-1
4.50
(.177)
2
5.00 ± 0.10
(.197 ± .004)
OUTSIDE WHEN
PINS ARE PARALLEL
6.30
(.248)
4.50
(.177)
0.20
(.008)
TYP.
3
2.55
(.100)
1 ADJ. SLOT
2.45 LONG
(.096)
X
.51
(.020)
WIDE
X
.55
(.022)
DEEP
2.55
(.100)
0.6 ± 0.1
(.024 ± .004)
3 PLCS.
5.00
(.197)
5.00
(.197)
4.00
(.157)
TYP.
2.55
(.100)
0.80
(.031)
DIA. TYP.
Packaging Specifications - J, G and R Styles
(J, G Styles)
TAPE
.36 MAX.
(.014)
(R Style)
TAPE
2.74 ± .10
(.108 ± .004)
5.52 ± 0.5
(.217 ± .020)
3.29 ± .10
(.130 ± .004)
1.5 + .10/ –.00
(.060 + .004/ - .000)
DIA.
4.00 ± .10
(.157 ± .004)
2.00 ± .05
(.079 ± .020)
5.26 ± .10 (J)
(.207 ± .004)
6.45 ± .10
(.254 ± .004)
(G)
5.26 ± .10
(.207 ± .004)
1.5 + .10/ –.00
(.059 + .004-.00)
DIA.
4.00 ± .10
(.157 ± .004)
2.00 ± .05
(.079 ± .002)
1.75 ± .10
(.069 ± .004)
12.00 ± .30
(.472 ± .012)
8.00 ± .20
(.315 ± .008)
REEL
1.78 ± .25
(.070) ± .010)
13.0 ± .51
(.512 ± .020)
DIA.
EQUAL SPACED 3 PLCS.
21.01 ± .79
(.827 ± .031)
DIA.
2.67 ± .25
(.105 ± .010)
1.75 ± .10
(.068 ± .004)
REEL
1.78 ± .254
(.070 ± .010)
EQUAL SPACED
3 PLCS.
13.0 ± .508
(.512 ± .020)
DIA.
59.18 ± 2.03
(2.330 ± .080)
.30 MAX.
(0.12)
6° ± 2°
5.52 ± 0.05
(.217 ± .002)
6.45 ± 0.10
(.254 ± .004)
5.26 ± .10
(.207 ± .004)
1.50 + 0.30 DIA.
(.059 ± .012)
12.00 ± .30
(4.72 ± .012
21.01 ± .789
(.000 ± .000)
DIA.
2.67 ± .254
(.105 ± .010)
59.18 ± 2.03
(2.330 ± .080)
177.8 ± 2.03
(7.00 ± .080)
DIA.*
(1333.000.2±±.027.09)DIA.**
12.4 + 2.01/ -.000
(.488 + .079/ - .000)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
2 WIPER
CCW 1
CLOCKWISE
3 CW
177.8 ± 2.03
(7.00 ± .080) DIA.*
(1333.000.2±±.027.09)DIA.**
12.4 + 2.01/ -.000
(.488 + .079/-.000)
* Embossed Tape Designator "E"
** Embossed Tape Designator "G"
(See How To Order chart for further information.)
Meets EIA specification 481.
TOLERANCES: ± 0.25 (.010) EXCEPT WHERE NOTED
DIMENSIONS ARE:
MM
(INCHES)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.


Part Number 3314J-1-502G
Description 4 mm Square Trimming Potentiometer
Maker Bourns Electronic Solutions
PDF Download

3314J-1-502G Datasheet PDF





Similar Datasheet

1 3314J-1-502E 4 mm Square Trimming Potentiometer
Bourns Electronic Solutions
2 3314J-1-502G 4 mm Square Trimming Potentiometer
Bourns Electronic Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy