ACML-7420 Datasheet | Broadcom

Description The Broad® ACML-7400, ACML-7410, and ACML-7420 are multi-channel, high-speed CMOS digital isolators. Using magnetic coupling through a thick insulation barrier, the isolators enable high-speed transmissions without promise in isolation performance. These isolators consume low power even at high data rates, yet provide excellent transient immunity performance in pact surface-mount packages. The devices are qualified to a maximum propagation delay of 36 ns and a maximum pulse width distortion of 3 ns. They are capable of running at a 100-Mbaud data rate. ACML-7400, ACML-7410, and ACML-7420 are available in 16-pin SOIC wide-body packages. They operate at dual 3.3V/5V supply voltages. The DC and timing specifications are specified over the temperature range of - 40°C to +105°C. ACML-7400, ACML-7410, and ACML-7420 are built using CMOS input buffers and CMOS output drivers to eliminate the need for both input limiters and output pull-up resistors. Refresh circuitry is built in to ensure DC-correctness. Applications - Isolated data interfaces - Data acquisition - Digital oscilloscopes - Power meters - High-speed video transmission Features - Dual supply voltage patible: 3.3V and 5V - Wide operating temperature range (- 40°C to +105°C) - Supports high-speed data rate of at least 100 Mbaud - Lower power consumption: 15 m A per channel, typical - Low propagation delay: 36 ns, maximum - Low propagation delay skew: - Channel-to-channel: 4 ns, maximum - Part-to-part: 8 ns, maximum - Low pulse width distortion: 3 ns, maximum - Safety and regulatory approvals: - UL Recognized - 5600 VRMS for 1 minute per UL1577 - CSA ponent Acceptance Notice #5 - IEC 62368-1 - Basic Insulation: 800 VRMS maximum working voltage - Reinforced Insulation: 400 VRMS maximum working voltage - IEC 61010-1 - Basic Insulation: 800 VRMS maximum working voltage - Reinforced Insulation: 400 VRMS maximum working voltage - IEC 60601-1 - Two means of patient protection: 250 VRMS maximum working...