AERD-N1CB Datasheet | Broadcom

Overview The LEDs in the Broad® infrared LED series are essentially conventional infrared though-hole LEDs in the form of surface-mount devices. The LEDs can be assembled using mon SMT assembly processes and are patible with an industrial reflow soldering process. Besides being packaged in a surface mount platform enabling solder reflow, the IR SMT lamps also offer a multiple range of optics design to address different applications needs. The IR SMT lamp is made with an advanced optical grade epoxy for superior performance in outdoor applications. Package stability and robustness boost the product's reliability to withstand critical outdoor conditions while exhibiting longevity features needed for semiconductor ponents. Features - Clear lens - Tall package for easier potting - Low power consumption - Typical peak wavelength: 850 nm - Typical viewing angle: 10°, 18°, 30°, and 40° Applications - Light curtains - Traffic control - Industrial sensing - Office automation CAUTION! The LED must be kept in a moisture barrier bag with <5% relative humidity (RH) when not in use because prolonged exposure to the environment might cause the leads to tarnish or rust, which might cause difficulties in soldering. Broad AERD-N1x B-DS103 February 7, 2024 AERD-N1AB/N1BB/N1CB/N1DB Data Sheet Figure 1: Package Drawing PIN 1 PIN 2 4.2 ±0.2 PIN 3 4.2 ±0.2 Dimension D Infrared SMT Round Lamps Part Number AERD-N1AB AERD-N1BB AERD-N1CB AERD-N1DB Dimension D 3.48 3.90 3.90 3.90 Dimension H 7.25 7.20 7.05 6.80 Dimension H 3.4 2.0 0.5 ±0.2 2.1 ±0.1 0.5 ±0.1 0.4 ±0.05 4.2 Pin 1 Pin 2 Pin 3 Lead Configuration Anode Cathode Anode NOTE: 1. All dimensions are in millimeters (mm). 2. Tolerance is ±0.5 mm unless otherwise specified. Broad AERD-N1x B-DS103...