HR5P-N4FA-00000 Datasheet | Broadcom

Description The Broad® HR5P-N4FA-00000 is a 5-mm round infrared LED lamp. It is available in an industrial standard 5-mm through lamp, making it easy to use and assemble. It has a peak wavelength of 940 nm and a viewing angle of 50 degrees. These features make it suitable for a wide variety of applications, such as surveillance cameras. The HR5P-N4FA-00000 is a cost-effective solution, offering superior performance and a uniform illumination pattern. Features - Untinted, non-diffused - Low power consumption - Easy assembly Applications - Industrial sensing - Illumination for remote control - Illumination for printers and scanners Figure 1: Package Drawing NOTE: 1. All dimensions in millimeters (mm). 2. Tolerance is ±0.25 mm unless otherwise specified. 3. Lead spacing is measured at where the leads emerge from the body. 4. Epoxy meniscus may extend up to maximum 1.00 mm down the leads. CAUTION! This device is a Class 3A HBM ESD sensitive per JEDEC Standard. Observe appropriate precautions during handling and processing. Refer to application note AN-1142 for additional details. Broad HR5P-N4FA-00000-DS104 April 22, 2022 HR5P-N4FA-00000 Data Sheet Device Selection Guide (TJ = 25°C, IF = 100 m A) 5-mm Round Infrared LED Lamp Radiant Intensity, Ie (m W/sr)a, b, c Viewing Angle, 2θ½ (°)d Part Number Die Type Min. Typ. Max. Typ. Al Ga As 50 a. The radiant intensity is measured at the mechanical axis of the package with a single current pulse condition (tp = 20 ms). b. The optical axis is closely aligned with the mechanical axis of the package. c. Tolerance is ±15%. d. θ½ is the off axis angle where the radiant intensity is half of the peak intensity. Absolute Maximum Ratings Parameters DC Forward Currenta Peak Forward Currentb, c Power Dissipation LED Junction Temperature Operating Temperature Range Storage Temperature Range a. Derate linearly as shown in Figure 4. b. Duty factor = 1%, tp = 100 µs. c. Pin...