INA166 Datasheet | Burr-Brown

FEATURES q LOW NOISE: 1.3n V/√Hz at 1k Hz q LOW THD+N: 0.09% at 1k Hz q WIDE BANDWIDTH: 450k Hz q WIDE SUPPLY RANGE: ±4.5V to ±18V q HIGH CMR: > 100d B q GAIN SET WITH EXTERNAL RESISTOR q SO-14 SURFACE-MOUNT PACKAGE DESCRIPTION The INA166 is a very low-noise, low-distortion, monolithic instrumentation amplifier. Its current-feedback circuitry achieves very wide bandwidth and excellent dynamic response over a wide range of gain. It is ideal for low-level signals such as microphones or hydrophones. Many industrial, instrumentation, and medical applications also benefit from its low noise and wide bandwidth. APPLICATIONS q MOVING-COIL TRANSDUCER AMPLIFIERS q DIFFERENTIAL RECEIVERS q BRIDGE TRANSDUCER AMPLIFIERS q MICROPHONE AND HYDROPHONE PREAMPS Unique distortion cancellation circuitry reduces distortion to extremely low levels, even in high gain. The INA166 provides near-theoretical noise performance for 200Ω source impedance. Its differential input, low noise, and low distortion provide superior performance as a low-level signal amplifier. The INA166 is available in a space-saving SO-14 surface-mount package, specified for operation over the - 40°C to +85°C temperature range. VI- N VI+N VO1 1 6kΩ A1 3kΩ 30.3Ω 3kΩ 6kΩ A2 60kΩ Sense 8 A3 60kΩ 9 VO G = 2000 Ref 10 14 VO2 11 6 V+ V- Copyright © 2000, Texas Instruments Incorporated SBOS178 Printed in U.S.A. December, 2000 SPECIFICATIONS: VS = ±5V TA = +25°C and at rated supplies, VS = ±5V, RL = 2kΩ connected to ground, G = 2000, unless otherwise noted. PARAMETER GAIN Gain Error Gain Temp Drift Coefficient Nonlinearity INPUT REFERRED NOISE Voltage Noise f O = 1k Hz f O = 100Hz f O = 10Hz Current Noise f O = 1k Hz INPUT OFFSET VOLTAGE Input Offset Voltage vs Temperature vs Power Supply INPUT VOLTAGE RANGE mon-Mode Voltage Range mon-Mode Rejection INPUT BIAS CURRENT Initial Bias Current vs Temperature Initial Offset Current vs Temperature INPUT IMPEDANCE DYNAMIC RESPONSE Bandwidth, Small Signal, - 3d B...