Datasheet4U Logo Datasheet4U.com

INA270 - Unidirectional Measurement Current-Shunt Monitor

Download the INA270 datasheet PDF. This datasheet also covers the INA270-Burr variant, as both devices belong to the same unidirectional measurement current-shunt monitor family and are provided as variant models within a single manufacturer datasheet.

General Description

D WIDE COMMON-MODE RANGE: 16V to +80V D CMRR: 120dB D ACCURACY: The INA270 and INA271 family of current-shunt monitors with voltage output can sense voltage drops across current shunts at common-mode voltages from

16V to +80V, independent of the supply voltage.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (INA270-Burr-Brown.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
INA270 Unidirectional Measurement Current-Shunt Monitor Texas Instruments
INA270A-Q1 Voltage Output Current Sense Amplifier Texas Instruments
INA271 Unidirectional Measurement Current-Shunt Monitor Texas Instruments
INA271-HT UNIDIRECTIONAL MEASUREMENT CURRENT-SHUNT MONITOR Texas Instruments
INA271A-Q1 Voltage Output Current Sense Amplifier Texas Instruments

Other Datasheets by Burr-Brown (Texas Instruments)

Part Number Description
INA271 Unidirectional Measurement Current-Shunt Monitor
INA200 (INA200 - INA202) High-Side Measurement Current-Shunt Monitor
INA201 (INA200 - INA202) High-Side Measurement Current-Shunt Monitor
INA202 High-Side Measurement Current-Shunt Monitor
INA203 (INA203 - INA205) Unidirectional Measurement Current-Shunt Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INA270 INA271 SBOS381 − FEBRUARY 2007 Voltage Output, Unidirectional Measurement Current-Shunt Monitor FEATURES DESCRIPTION D WIDE COMMON-MODE RANGE: −16V to +80V D CMRR: 120dB D ACCURACY: The INA270 and INA271 family of current-shunt monitors with voltage output can sense voltage drops across current shunts at common-mode voltages from −16V to +80V, independent of the supply voltage. The INA270 and − ±2.5mV offset (max) INA271 pinouts readily enable filtering. − ±1% gain error (max) − 20µV/°C offset drift (max) − 55ppm/°C gain drift (max) The INA270 and INA271 are available with two output voltage scales: 14V/V and 20V/V. The 130kHz bandwidth simplifies use in current-control loops. D BANDWIDTH: Up to 130kHz The INA270 and INA271 operate from a single +2.