Download the TMP411 datasheet PDF.
This datasheet also covers the TMP411_Burr variant, as both devices belong to the same temperature sensor family and are provided as variant models within a single manufacturer datasheet.
General Description
The TMP411 is a remote temperature sensor monitor with a built-in local temperature sensor.
The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or FPGAs.
Key Features
D D D D D D D D D D D D D D D D D D D D
±1°C REMOTE DIODE SENSOR ±1°C LOCAL.
Full PDF Text Transcription for TMP411 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
TMP411. For precise diagrams, and layout, please refer to the original PDF.
TMP411 SBOS383A − FEBRUARY 2007 ±1°C Remote and Local TEMPERATURE SENSOR with N-Factor and Series Resistance Correction FEATURES D D D D D D D D D D D D D D D D D D D D ±...
View more extracted text
sistance Correction FEATURES D D D D D D D D D D D D D D D D D D D D ±1°C REMOTE DIODE SENSOR ±1°C LOCAL TEMPERATURE SENSOR PROGRAMMABLE NON-IDEALITY FACTOR SERIES RESISTANCE CANCELLATION ALERT FUNCTION PROGRAMMABLE RESOLUTION: 9 to 12 Bits PROGRAMMABLE THRESHOLD LIMITS TWO-WIRE/SMBus SERIAL INTERFACE MINIMUM AND MAXIMUM TEMPERATURE MONITORS MULTIPLE INTERFACE ADDRESSES ALERT/THERM2 PIN CONFIGURATION DIODE FAULT DETECTION DESCRIPTION The TMP411 is a remote temperature sensor monitor with a built-in local temperature sensor.
TMP411 Datasheet
