900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Burr-Brown Corporation

DCR021205 Datasheet Preview

DCR021205 Datasheet

REGULATED DC/DC CONVERTERS

No Preview Available !

DCR02 SERIES
SBVS028A − DECEMBER 2000 − REVISED APRIL 2004
Miniature, 2W Isolated
REGULATED DC/DC CONVERTERS
FEATURES
D UL1950 Recognized
D DIP-18 and SO-10 Packages
D 55W/in3 (3.3W/cm3) Power Density
D Device-to-Device Synchronization
D Thermal Protection
D 1000Vrms Isolation
D 400kHz Switching
D 125 FITS at 55°C
D Short-Circuit Protection
D 12V, 24V Inputs
D 5V Outputs
APPLICATIONS
D Point-of-Use Power Conversion
D Digital Interface Power
D Ground Loop Elimination
D Power-Supply Noise Reduction
DESCRIPTION
The DCR02 family is a series of high-efficiency,
input-isolated, output-regulated DC/DC converters. In
addition to 2W nominal, galvanically-isolated output power
capability, this range of converters offers very low output
noise and high accuracy.
The DCR02 family is implemented in standard molded IC
packaging, providing standard JEDEC outlines suitable
for high-volume assembly.
The DCR is manufactured using the same technology as
standard IC packages, thereby achieving very high
reliability.
SYNC
VREC
VS
In p u t
C o n tro lle r
LDO
R egulator
ENABLE
ERROR
VOUT
0VIN
0VOUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright 2000−2004, Texas Instruments Incorporated
www.ti.com




Burr-Brown Corporation

DCR021205 Datasheet Preview

DCR021205 Datasheet

REGULATED DC/DC CONVERTERS

No Preview Available !

DCR02 SERIES
SBVS028A − DECEMBER 2000 − REVISED APRIL 2004
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to
damage because very small parametric changes could cause the device not to meet its published specifications.
ORDERING INFORMATION(1)
PRODUCT
DCR021205
PACKAGE-LEAD
DIP−18
SO−10(2)
SO−10(2)
PACKAGE
DESIGNATOR
NVE
DVS
DVS
SPECIFIED
TEMPERATURE
RANGE
−40°C to +70°C
−40°C to +70°C
−40°C to +70°C
PACKAGE
MARKING
DCR021205P
DCR021205P−U
DCR021205P−U
DCR022405
DIP−18
SO−10(2)
SO−10(2)
NVE
DVS
DVS
−40°C to +70°C
−40°C to +70°C
−40°C to +70°C
DCR022405P
DCR022405P−U
DCR022405P−U
(1) For the most current package and ordering information, refer to our web site at www.ti.com.
(2) SO−10 packages have 18 pins, but only 10 pins are active.
ORDERING
NUMBER
TRANSPORT MEDIA,
QUANTITY
DCR021205P
DCR021205P−U
DCR021205P−U/700
DCR022405P
DCR022405P−U
DCR022405P−U/700
Rail, 20
Rail, 20
Tape and Reel, 700
Rail, 20
Rail, 20
Tape and Reel, 700
SUPPLEMENTAL ORDERING INFORMATION
DCR02 12 05 (P)
Basic Model Number: 1W Product
Voltage Input:
12V In
Voltage Output:
5V Out
Package Code:
P = 18-Pin Plastic DIP
P-U = SO-10
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
DCR02 SERIES UNIT
DCR0212 15 V
Input Voltage
DCR0224 29 V
Storage Temperature
−60 to +125
°C
Lead Temperature (soldering, 10s)
+270
°C
(1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods
may degrade device reliability. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those specified is not implied.
PIN ASSIGNMENTS
NVE and DVS
PACKAGES
(TOP VIEW)
VS 1
NC 2
18 SYNC
17 0VIN
VREC 7
0VOUT 8
VO 9
DCR02
12 ERROR
11 ENABLE
10 DNC
Terminal Functions
TERMINAL
NAME NO. I/O
DESCRIPTION
VS 1 I Voltage input
NC 2
No connection
VREC
7 O Rectified output
0VOUT 8 O Output ground
VO 9 O Voltage output
DNC
10
Do not connect
ENABLE 11
O Output voltage enable
ERROR 12
O Error flag active low
0VIN
17 I Input ground
SYNC 18 I Synchronization input
NOTE: I = input and O = output.
2


Part Number DCR021205
Description REGULATED DC/DC CONVERTERS
Maker Burr-Brown Corporation
PDF Download

DCR021205 Datasheet PDF






Similar Datasheet

1 DCR021205 DCR02 Series: Miniature 2W Isolated Regulated DC/DC Converters (Rev. B)
ETCTI
2 DCR021205 REGULATED DC/DC CONVERTERS
Burr-Brown Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy